Programmed Repeat

OPERATION (CONTINUED)

NOTES ON PROGRAMMED PLAY:
• Programming is the ability to preselect the order in which a series of tracks
	will be played.
• Each track may be stored in the program memory as many times as desired.
• As each track is played, its track number will be displayed. You can move for-
	ward or backward through the programmed tracks with the Skip/Search o or
•	button.
	nThe CD player will stop after all programmed tracks have been played or the
•	STOP (■) button is pressed.
	The Program memory will be cleared when the unit is turned off or changed
•	to another mode or when the CD door is opened.
	To check the program, while in the Stop mode, press the PROGRAM button

once, "01" will blink in the display, then the first selected track will blink in the display. Press the PROGRAM button again, "02" will blink in the display, then the second selected track will blink in the display. Press the PROGRAM but- ton repeatedly to check the other programmed tracks.

It is also possible to use the Program and	Press the PLAY/PAUSE (®/p) button
Repeat functions together to repeat a	to begin programmed repeat
specific program indefinitely. First,	playback; both the PROGRAM and
program the tracks you wish to hear in the	REPEAT indicators will light. The
order you wish to hear them, as described	player will play the tracks you
on page 11. Then, press the REPEAT	selected in the order in which you
button twice. The PROGRAM indicator	programmed them. When the last
will blink and the REPEAT indicator will	track in the program has been played,
light.	the entire program will begin again.
NOTE:
Program Repeat operation will continue indefinitely until you press the STOP (■)
button.