JVC LVT1000-004A, 601-610000-030 manual Important for Laser Products

Page 2

Warnings, Cautions and Others

IMPORTANT for the U.K.

DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.

BE SURE to replace the fuse only with an identical approved type, as originally fitted.

If nonetheless the mains plug is cut off ensure to remove the fuse and dispose of the plug immediately, to avoid a possible shock hazard by inadvertent connection to the mains supply.

If this product is not supplied fitted with a mains plug then follow the instructions given below:

IMPORTANT:

DO NOT make any connection to the terminal which is marked with the letter E or by the safety earth symbol or coloured green or green-and-yellow.

The wires in the mains lead on this product are coloured in accordance with the following code:

Blue : Neutral

Brown : Live

As these colours may not correspond with the coloured markings identifying the terminals in your plug proceed as follows:

The wire which is coloured blue must be connected to the terminal which is marked with the letter N or coloured black.

The wire which is coloured brown must be connected to the terminal which is marked with the letter L or coloured red.

IF IN DOUBT - CONSULT A COMPETENT ELECTRICIAN.

Caution –– STANDBY/ON button!

Disconnect the mains plug to shut the power off

completely. The STANDBY/ON button in any position does not disconnect the mains line. The power can be remote controlled.

CAUTION

To reduce the risk of electrical shocks, fire, etc.:

1.Do not remove screws, covers or cabinet.

2.Do not expose this appliance to rain or moisture.

IMPORTANT FOR LASER PRODUCTS

REPRODUCTION OF LABELS

1CLASSIFICATION LABEL, PLACED ON EXTERIOR SURFACE

2WARNING LABEL, PLACED INSIDE THE UNIT

CAUTION - INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK

DEFEATED. AVOID DIRECT EXPOSURE TO BEAM.

VORSICHT ! UNSICHTBARE LASERSTRAHLUNG TRITT AUS, WENN DECKEL

GEÖFFNET UND WENN SICHERHEITSVERRIEGLUNG ÜBERBRÜCKT

IST. NICHT DEM STRAHL AUSSETZEN!

VARNING - OSYNLIG LASERSTRÄLNING NÄR DENNA DEL ÄR ÖPPNAD OCH

SPÄRR ÄR URKOPPLAD STRÅLEN ÄR FARLIG.

ADVARSEL - USYNLIG LASERSTRÅLING VED ÅBNING NÅR

SIKKERHEDSAFBRTDERE ER UDE AF FUNKTION. UNDGÅ

UDSÆTTELSE FOR STRÅLING.

1.CLASS 1 LASER PRODUCT

2.DANGER: Invisible laser radiation when open and interlock failed or defeated. Avoid direct exposure to beam.

3.CAUTION: Do not open the top cover. There are no user serviceable parts inside the Unit; leave all servicing to qualified service personnel.

CAUTION

Do not block the ventilation openings or holes.

(If the ventilation openings or holes are blocked by a newspaper or cloth, etc., the heat may not be able to get out.)

Do not place any naked flame sources, such as lighted candles, on the apparatus.

When discarding batteries, environmental problems must be considered and local rules or laws governing the disposal of these batteries must be followed strictly.

Do not expose this apparatus to rain, moisture, drippimg or splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.

Caution: Proper Ventilation

To avoid risk of electric shock and fire, and to prevent damage, locate the apparatus as follows:

1Front:

No obstructions and open spacing.

2Sides/ Top/ Back:

No obstructions should be placed in the areas shown by the dimensions below.

3Bottom:

Place on the level surface. Maintain an adequate air path for ventilation by placing on a stand with a height of 10 cm or more.

Front view

15cm

Side view

15cm

15cm

15cm15cm

15cm

10cm

10cm

G-1

Image 2
Contents RC-ST3SL Important for Laser Products Above ALL Contents Handling PrecautionsOperation on batteries Power SupplyOperation on household AC Front Names of Parts and ControlsTop Remote Control Unit RearInstalling batteries Battery replacementTo turn on the unit To turn off the unit Setting the ClockTurning the Unit on and OFF Listening through headphones Adjusting the SoundVolume adjustment Changing the EQ equalizer settingPlaying Compact Discs Playable discsBasic operations Random playback Various playback operationsRepeat playback Introductory playbackProgrammed playback Stop 1,3 2 5Radio Reception Tuning to a stationChanging the FM reception mode Tuning to a preset station Presetting stationsAdjusting the antennas To fast-wind a tape Cassette OperationsPlaying back a cassette To prevent accidental erasureTo remove beats during AM broadcast recording Recording on a cassetteTo start recording at the exact moment To stop recording To erase the recordingCleaning the heads, capstan and pinch roller MaintenanceCleaning the cabinet Cleaning the CD pickup lensTroubleshooting Remote control does not functionSpecifications Victor Company of JAPAN, Limited 601-610000-040 LVT1000-005A Achtung Achtung Class 1 Laser Product LASER-PRODUKT DER Klasse English Power Supply 9101112 Remote Control Unit Installing batteries Turning the Unit on and OFF JOG Volume Phones HBS VOL Playing Compact Discs Stop 4 ¢ CD 6 Randomintro Stop 1,3 Radio Reception Presetting stations Cassette Operations Recording on a cassette Maintenance Troubleshooting Specifications EN, GE, FR, NL, SP, IT Bruksanvisning Käyttöohje Brugsvejledning Viktigt Klasse 1 Laser Produkt Contents Power Supply Names of Parts and Controls Remote Control Unit Installing batteries Turning the Unit on and OFF Adjusting the Sound Playing Compact Discs Basic operations Various playback operations Programmed playback Radio Reception Presetting stations Cassette Operations Recording on a cassette Maintenance Troubleshooting Specifications EN, SW, FI, DA 0203NYMBICMTS