COMPULINK-3 Remote Control System

Playing the program repeatedly

To repeat playback according to the program, press the REPEAT button, and select and show “REPEAT” on the display. Then start playing, which will be repeated until stopped.

This function can be used in the basic PROGRAM mode as well as when the RANDOM function is effective.

Press the REPEAT button twice to cancel the function, clearing the indication from the display during stop.

Playing a program step repeatedly

To repeatedly play a specific program step, select the step using

or buttons during playback, press the REPEAT button twice and show “REPEAT 1” on the display. The selected step is played back repeatedly.

This function can be used in the basic PROGRAM mode as well as when the RANDOM function is effective.

Press the REPEAT button once to cancel the function, clearing the indication from the display.

The CompuLink system, which is a JVC-developed remote control system, links JVC audio components to establish systematized operation control of the linked components.

NOTE: There are three versions of the CompuLink system: CompuLink-1, -2, and -3. Although they are basically compatible, some functions may not be available with the older versions (refer to the instructions manual of the component for the information).

The CompuLink-3 Remote Control System provides the following functions:

Automatic power on/off

Turning a linked component on or off will automatically turn the amplifier/receiver on or off.

Selecting a source on the amplifier/receiver will turn on the relevant component.

CAUTION

•Be sure to use the accessory CompuLink cable for the connection.

•The operation may be disrupted if the power supply to a component is interrupted, in which case turn off all linked components and turn them on again.

Automatic source selection

Selecting a source on the connected amplifier/receiver will automatically turn on the relevant component and start its operation. Starting a linked component will automatically select the relevant source on the amplifier/receiver.

Synchronized recording

This function is effective when a JVC cassette deck is linked in the CompuLink system, allowing simple, synchronized recording.

NOTE: Refer to the instruction manual of your cassette deck for the detail of the synchronized recording.

Some functions are disabled in order to prevent the recording trouble during the synchronized recording.