CONTROL PANEL AND REMOTE CONTROL
Control panel
2
STANDBY
POWER
1
ENHANCED COMPULINK CONTROL SYSTEM '
Alphabetic letters in brackets following button names indicate their counterparts on the remote control.
4 |
| 5 |
|
| 6 |
OPEN/CLOSE | STOP/CLEAR |
| PLAY/PAUSE | ||
EXCHANGE | RANDOM | INTRO |
| 15 | 16 |
7 | 8 | 9 |
|
|
|
REPEAT | PLAY MODE | MEMORY |
| CALL | CANCEL |
10 | 11 | 12 | 13 |
| 14 |
3 |
| DISC/TRACK |
|
| |
|
|
|
| ||
DOWN |
|
| UP |
| |
200 |
| 17 |
|
|
|
|
|
|
|
| |
DISC EJECT |
| DISC |
|
| TRACK |
18 |
| 19 |
|
| 20 |
1 POWER button [ a ] | 11 PLAY MODE button [ b , c , d ] |
Turns the power on or off. The STANDBY indicator above lights when the power is turned off and the unit is in the standby state; it goes out when the power is turned on. (To turn off the unit completely, unplug the power cord from the wall socket.)
2Display
Selects in turn a mode of playing successive discs continuously (CONTINUE), one disc only (ONE DISC), or according to a program (PROGRAM). Refer to the description of each playback mode for details.
12 MEMORY button [ o ]
Shows the current operation status (see next page for more information).
Enters specified disc and track numbers as a program step in the PROGRAM mode.
3Disc storage
Holds up to 200 discs in slots of a carousel, which rotates inside the disc storage.
4OPEN/CLOSE button [ e ]
Opens or closes the door of the disc storage. The disc in the play position will be retracted into its carousel slot when the door is opened.
5STOP/CLEAR button [ p ]
Stops playing the disc. Pressing the button in the PROGRAM mode clears all program steps if the unit is stopped.
6PLAY/PAUSE button [ q , r ]
Retrieves a disc from the carousel slot, places it in the play position, and starts playing the disc; or interrupts the playing temporarily, or restarts the interrupted playing.
7EXCHANGE button [ i ]
Opens the disc storage door without retracting the disc currently in the play position, and permits to change discs in the slots positioned in the front.
8RANDOM button [ f ]
Selects or deselects the RANDOM playback function (see the description of playback modes).
9INTRO button [ g ]
Selects or deselects the INTRO playback function (see the description of playback modes).
10REPEAT button [ h ]
Selects or deselects the REPEAT or REPEAT 1 playback function (see the description of playback modes).
13CALL button [ m ]
Displays the programmed steps for review or deletion in the PROGRAM mode.
14CANCEL button [ n ]
Cancels the currently displayed program step (disc and track numbers) in the PROGRAM mode.
15
(track skip/search backward) button [ s , u ]
Skip tracks or search for a track backward. Holding down this button causes playback to fast backward.
16
(track skip/search forward) button [ t , v ]
Skip tracks or search for a track forward. Holding down this button causes playback to fast forward.
17DISC/TRACK jog dial
Used to select a disc or track — the DISC or TRACK button located below the dial determines the dial function. “JOG” and “DISC” or “TRACK” will be shown on the display when the function is selected.
18DISC EJECT button
Raises the disc in the load/unload position of the disc storage when its door is open.
Pressing this button when the door is closed retrieves the disc from the play position and brings it to the load/unload position. The disc will then be popped up when the door is opened.
19DISC button [ j ]
Selects the DISC/TRACK jog dial function for discs.
20TRACK button [ k ]
Selects the DISC/TRACK jog dial function for tracks.
4