Remote Control Battery

The remote control requires one “button-type”3-volt Lithium battery, included. To extend the life of the original battery we have inserted a small clear plastic spacer tab between the lithium battery and the battery terminal.

You must remove this battery spacer tab before you can use the remote control.

To remove the tab, pull it in the direction of the arrow in the illustration as shown.

POWER

STOP/ PLAY/

TIMER FUNCTION BAND PAUSE

	SLEEP	TUN .
	SLEEP	SKIP/SEARCH
R A N D O M REPEAT		INTRO/ST. PRG.
MEMO .
X - B A S S	E Q	M U T E

Remove before use

Remueva antes de usar

When the operation of the remote control becomes intermittent or unsatisfactory, replace the original battery with a new 3-volt Lithium battery.

The battery number is CR2025 or equivalent.

1.) To replace the battery, slide the battery holder out of the remote control in the direction of ‘arrow’.

2.) Remove the original battery from the holder and install a new CR2025 battery with the “+”side facing up as shown in the illustration. Then slide the battery holder back into the remote control.

POWER

STOP/ PLAY/

TIMER FUNCTION BAND PAUSE

TUN.

SLEEP SKIP/SEARCH

RANDOM REPEAT INTRO/ST. PRG.

MEMO.

X-BASS EQ MUTE

1 2

CR2025

Dispose of the original battery properly. It should not be thrown into a fire as the battery may explode if incinerated. It should not be left around where small children or pets might play with, or swallow it. If the battery is accidentally swallowed, contact a physician immediately.

PD3686_021705r.p65

17/2/2005, 16:14