Listening To The Radio
1.) Press the 
POWER button. The main display turns ‘On’.
2.) If necessary, press the FUNCTION button to select the Tuner function. The display will show an AM or FM station frequency.
To select a different band, press the 
STOP/
BAND button.
3.) Tune to the desired frequency as follows:
•Automatic Tuning
Press and hold the 
or 
button until the display begins to move, then release the buttons. The tuner will search up or down the band for the next strong station and stop on that station. Repeat this procedure until the tuner stops on your desired station.
•Manual Tuning
Repeatedly press the 
or 
button until the frequency of the desired station appears on the display. Use manual tuning to select weaker stations that cannot be tuned automatically.
4.) If you tuned to an FM Stereo station, the 
indicator will appear in the display.
If the reception is noisy or weak, press the INTRO/ST. button to select FM
Mono mode. The 
indicator will disappear. The reception will normally improve although the sound will no longer be in stereo.
5.) Adjust the VOLUME,
17
PD3686_021705r.p65 | 17 |
17/2/2005, 16:14