Setting The Clock
When the unit is connected to the AC outlet for the first time “–
Note: Do not turn the main unit power ‘On’. The clock can only be set while the main unit power is ‘Off’.
1.) Press and hold the PRG. button. The “12H” flashes on display.
Press 
or 
button to select between “24H”
2.) Press the PRG. button again. Just the Hour digits will continue flashing.
3.) Press the 
or 
button to set the display to the correct hour, AM or PM.
4.) Press the PRG. button again. The Minute digits will begin flashing.
5.) Press the 
or 
button to set the display to the correct minutes.
6.) Press the PRG. button once more.
Only the colon (“:”) continues flashing and the clock begins to run.
16
PD3686_021705r.p65 | 16 |
17/2/2005, 16:14