Note: If the disc is inserted upside down or if the disc is badly scratched and unreadable, playback will not be possible. In this case the main display will show “no dISC”. Remove the disc and re insert it properly, or try another disc.
6.) Press the 
button to begin playback on track “01”. The display will show the elapsed playing time of each track as it plays.
7.) Adjust the VOLUME,
8.) When the last track has played the player stops automatically and the display again shows the total playing time and tracks on the disc. You may also stop playback at any time by pressing the 
STOP/BAND button.
9.) When you are finished listening, press the OPEN/CLOSE position to open the CD door and remove the disc.
10.)Press the 
POWER button to return the system to the Standby (Power Off) mode.
PAUSE Control
To pause momentarily during CD playback press the 
button again. The sound stops and the elapsed time display flashes but the disc continues to spin.
Press the 
button once more to cancel Pause mode and resume playback. The elapsed time display stops flashing.
22
PD3686_021705r.p65 | 22 |
17/2/2005, 16:14