Using the Sabbath Feature.

(Designed for use on the Jewish Sabbath and Holidays.)

www.GEAppliances.com

The Sabbath feature can be used for baking/roasting only. It cannot be used for convection, broiling, self-cleaning or Delay Start cooking.

NOTE: The oven light comes on automatically (on some models) when the door is opened and goes off when the door is closed. The bulb may be removed. See the Oven Light Replacement section. On models with a light switch on the control panel, the oven light may be turned on and left on.

How to Set for Regular Baking/Roasting

Make sure the clock shows the correct time of day and

 

Using the number pads, enter the desired

 

the oven is off.

 

temperature between 170°F and 550°F.

 

 

Press and hold both the BAKE and BROIL

No signal or temperature will be given.

 

Touch the START pad.

 

HI/LO pads, at the same time, until the

 

 

 

 

display shows SF.

 

 

 

 

Safety Instructions

When the display shows the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

NOTE: If bake or broil appears in the display, the BAKE and BROIL HI/LO pads were not touched at the same time. Touch the CLEAR/OFF pad and begin again.

Tap the DELAY START pad until SAb bAtH appears in the display.

Touch the START pad and ⊃ will appear in the display.

Touch the BAKE pad. No signal will be given.

After a random delay period of approximately 30 seconds to 1 minute,

⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ ⊃ doesn’t appear in the display, start again at Step 4.

To adjust the oven temperature, touch the BAKE pad, enter the new temperature using the number pads, and touch the START pad.

NOTE: The CLEAR/OFF and COOK TIME pads are active during the Sabbath feature.

Operating Instructions

How to Set for Timed Baking/Roasting – Immediate Start and Automatic Stop

Care

When the display shows the oven is set in Sabbath. When the display shows ⊃ ⊃ the oven is baking/roasting.

Make sure the clock shows the correct time of day and the oven is off.

Press and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

NOTE: If bake or broil appears in the display, the BAKE and BROIL HI/LO pads were not touched at the same time. Touch the CLEAR/OFF pad and begin again.

Tap the DELAY START pad until SAb bAtH appears in the display.

Touch the START pad and ⊃ will appear in the display.

Touch the COOK TIME pad.

Touch the number pads to set the desired length of cooking time between 1 minute and 9 hours and 99 minutes. The cooking time that you entered will be displayed.

Touch the BAKE pad. No signal will be given.

Using the number pads, enter the desired temperature. No signal or temperature will be given.

Touch the START pad.

After a random delay period of approximately 30 seconds to 1 minute,

⊃ will appear in the display indicating that the oven is baking/roasting. If ⊃ ⊃

doesn’t appear in the display, start again at Step 7.

To adjust the oven temperature, touch the BAKE pad, enter the new temperature using the number pads and touch the START pad.

When cooking is finished, the display will change from ⊃ ⊃ to ⊃ and 0:00 will appear, indicating that the oven has turned OFF but is still set in Sabbath. Remove the cooked food.

and Cleaning Troubleshooting

Touch the START pad.

Tips

How to Exit the Sabbath Feature

Touch the CLEAR/OFF pad.

If the oven is cooking, wait for a random delay period of approximately 30 seconds to 1 minute, until only ⊃ is in the display.

Press and hold both the BAKE and BROIL HI/LO pads, at the same time, until the display shows SF.

Tap the DELAY START pad until 12 shdn or no shdn appears in the display. 12 shdn indicates that the oven will automatically

turn off after 12 hours. no shdn indicates that the oven will not automatically turn off.

Touch the START pad.

NOTE: If a power outage occurred while the oven was in Sabbath, the oven will automatically turn off and stay off even when the power returns. The oven control must be reset.

9

Consumer Support

Page 9
Image 9
GE JT91230 Using the Sabbath Feature, Tips, Cleaning Troubleshooting, Designed for use on the Jewish Sabbath and Holidays

JT91230, JT95230 specifications

The GE JT95230 and JT91230 are advanced jet engines designed by General Electric, renowned for their cutting-edge technologies and performance efficiencies. These engines are primarily utilized in the commercial aviation sector, equipping several popular aircraft models with the power and reliability needed for modern air travel.

One of the principal features of the GE JT95230 and JT91230 is their high thrust-to-weight ratio, which translates into improved aircraft performance and fuel efficiency. These engines are engineered with a focus on aerodynamic optimization, resulting in enhanced airflow and reduced drag. This design approach allows for superior fuel economy, ultimately contributing to lower operational costs for airlines.

The JT95230, a part of the GE80 series, incorporates a two-spool high bypass turbofan configuration. This configuration includes a large fan at the front, which significantly contributes to the engine's thrust. Meanwhile, the high bypass ratio allows the engine to operate at lower speeds, thereby reducing fuel consumption while maintaining high efficiency during various flight phases.

In contrast, the JT91230 features a more compact design, yet still retains robust performance capabilities. This engine is particularly noted for its durability and reliability, essential characteristics for commercial operators facing stringent safety and maintenance demands. The JT91230’s design also emphasizes noise reduction, aligning with modern regulations and environmental standards.

Technologically, both the JT95230 and JT91230 utilize advanced materials like titanium and composite structures, enhancing structural integrity while keeping weight to a minimum. Precise manufacturing techniques, including additive manufacturing, allow for greater accuracy and performance optimization in component production.

Another significant aspect is the incorporation of digital engine control systems, which enable real-time monitoring and adjustments of engine performance parameters. This technology enhances operational efficiency and allows for predictive maintenance, reducing downtime and increasing reliability. Furthermore, the engines are designed to be easily maintainable, ensuring that airline operators can quickly service and return them to operation.

Overall, the GE JT95230 and JT91230 embody a blend of advanced technology, efficiency, and reliability. Their innovative designs and features position them as leading choices for airlines looking to enhance their fleet performance, reduce fuel costs, and meet modern aviation regulations.