Adjusting the sound volume balance
11. Enter the balance mode.
•“BAL” and the balance level is displayed for 3 seconds.
12. Adjust the sound volume balance between the left and right speakers.
•If the balance display disappears, start from the step 11 again.
■Note:
•In general, the balance level is set to 0.
LISTENING TO RADIO BROADCASTS
Auto tuning
1. Select the tuner and then the desired band.
• Each time this button is pressed, the band is changed to FM or AM.
2. Select the tuning mode.
• Each time this button is pressed, the mode changes as follows:
→ Tuning mode : “PRESET” goes off. Preset mode : “PRESET” lights up. ←
3. Press the TUNING/PRESET UP (▲/+) or DOWN
• The tuner will now search until a station of sufficient strength has been found. The display shows the tuned frequency and “TUNED”.
• If the station found is not the desired one, simply repeat this operation.
• Weak stations are skipped during auto tuning.
12