ALowering the Built-in Flash

To save power when the flash is not in use,

press it gently downward until the latch clicks into place. Do not use force. Failure to

observe this precaution could result in prod- uct malfunction.

AUsing the Built-in Flash

The built-in flash can be used in auto photo mode and when P, S, A, M, Night portrait, Backlighting, Soft, Miniature effect, or Selective color is selected in creative mode. If the flash is fired multiple times in quick succession, the flash and shutter may be temporarily disabled to protect the flash. Shooting can be resumed after a brief pause.

Objects close to the camera may be overexposed in photographs taken with the flash at high ISO sensitivities.

To avoid vignetting, remove lens hoods and shoot at ranges of at least

0.6m (2 ft). Some lenses may cause vignetting at greater distances or obstruct the red-eye reduction lamp, interfering with red-eye reduc- tion. The following illustrations show the effect of vignetting caused by shadows cast by the lens when the built-in flash is used.

Shadow

Shadow

ASee Also

See page 61 for information on adjusting the flash level.

t

57

Page 59
Image 59
Nikon SB2F01 11, 6MVA3111 01, J2 White ALowering the Built-in Flash, To save power when the flash is not in use