4 Attach a lens.

Be careful to prevent dust from entering the camera when the lens or body cap is removed.

s

Mounting mark

(camera)

Mounting mark (lens)

Mounting mark (lens)

Keeping marks aligned, position lens on camera, then rotate until it clicks into place.

5 Turn the camera on.

Press the power switch to turn the camera on. The power lamp will briefly light green and the monitor will turn on. Be sure to remove the lens cap before shooting.

ATurning the Camera Off

To turn the camera off, press the power switch again. The monitor will turn off.

Check the battery level and number of exposures remaining in the moni- tor (0 15).

Battery level

Exposures remaining

18

Page 20
Image 20
Nikon 6MVA3111 01, J2 White, SB2F01 11 user manual Attach a lens, Turn the camera on, ATurning the Camera Off