Remote Control Battery Installation (Model PD6560BL Only)
1.) Open the battery door on the back of the remote control by pressing on the tab of the battery door in the direction of the arrow and lift it up.
2.) Insert two “AAA” alkaline batteries (not included) into the battery compartment. Be sure the batteries are inserted according to the polarity markings inside the battery compartment.
3.) Replace the battery door.
Battery Replacement
When the batteries become too weak, the operating distance of the remote control is greatly reduced and you will need to replace the batteries.
Using The Remote Control Correctly
•Point the remote control to the Remote Sensor on main unit front panel.
•When there is a strong ambient light source, the performance of the infrared Remote Sensor may be degraded, causing unreliable operation.
•The maximum effective distance for remote control operation is about 15 feet.
10
PD6559.60_B102306.p6510
23/10/2006, 10:14