Programmed Playback
You can program up to 20 tracks on a disc to playback in any desired order. You may also program a specific track to play several times within the same program.
NOTE: The player cannot be programmed while a disc is playing. If a disc is playing press the 
STOP/BAND button to stop playback before you begin the programming steps below.
1.) Press the “FUNCTION” button to select the CD mode, insert your disc in the player, close the door, and wait until the total track number appears in the display.
2.) Press the PROGRAM button on front panel or PROG./MEMORY button on the remote control once. The MEMORY indicator begins flashing in the display. “P01” appears briefly then “00” flashes.
3.) Press the 
or 
button to select the first track to be programmed.
Example: Track 08.
4.) Press the PROGRAM button on front panel or PROG./MEMORY button on the remote control to enter the track “08” in program memory number “P01”.
“P02” appears briefly then “00” flashes again in the display, indicating that you may now select a track to be entered in program memory number “P02”.
5.) Press the 
or 
buttons to select the next track to be programmed. When the desired track number flashes in the display press the PROGRAM button on front panel or PROG./MEMORY button on the remote control again to enter that track in the program memory.
21
PD6559.60_B102306.p6521
23/10/2006, 10:14