Listening To The Radio
1.) Press the POWER button. The display turns ‘On’.
2.) If necessary, press the “FUNCTION” button to select the Tuner function.
The display will show an AM or FM station frequency.
To select a different band, press the 
STOP/
BAND button again.
3.) Tune to the desired frequency as follows:
•Manual Tuning
Repeatedly press the TUNING 
or 
buttons until the frequency of the desired station appears on the display.
•Automatic Tuning
Press and hold the TUNING 
or 
buttons until the display begins to move, then release the buttons. The tuner will search up or down the band for the next strong station and stop on that station. Repeat this procedure until the tuner stops on your desired station.
4.) Adjust the VOLUME and
5.) If you tuned to an FM Stereo station the 
indicator will appear in the display.
6.) When you are finished listening, press the POWER button. The display goes ‘Off’.
12
PD6559.60_B102306.p6512
23/10/2006, 10:14