6.) Repeat Step 5 until you have entered up to 20 tracks in the program memory.
When the memory is full, the “–
7.) To begin programmed playback press the 
PLAY/PAUSE button.
The display will show the first programmed track and playback will begin on that track.
The MEMORY indicator remains ‘On’.
•After the last programmed track has played the player stops but the programmed tracks remain in the memory.
•To play the programmed tracks again, press the PROGRAM button on front panel or PROG./MEMORY button on the remote control and then the 
PLAY/ PAUSE button.
•To cancel the programmed sequence from memory, press the 
STOP/BAND button at programming mode, or open the CD door.
Programmed Repeat Playback
You can use the Program and Repeat features together to continuously repeat a programmed sequence of tracks.
1.) First, program the desired tracks according to Steps 1 through 6 on the previous page.
2.) When Programmed Playback begins press the PLAY MODE button on front panel or
3.) The REPEAT indicator appears in display and all the tracks in your programmed sequence will be repeated continuously.
To cancel Programmed Repeat Playback press the 
STOP/BAND button until both the MEMORY and REPEAT indicators disappear.
22
PD6559.60_B102306.p6522
23/10/2006, 10:14