Freecom Technologies MediaPlayer Drive-In Kit manual Basic Setup, Video Setup

Use as Multimedia Player
3.2 Basic Setup	GB
3.2.1 Video Setup
This chapter shows you how to setup the video output of the player. You have	3
to setup the player's video output mode to correspond to the video input mode
of your TV.

When you do not see a normal screen after connecting video cable, check the following:

1."TV "– Switch to Video Input Mode: Turn on TV, and switch to video input mode same as video connection. See TV user manual.

2."Player" – Switch to Video Output Mode: Press [VIDEO] button repeatedly. Whenever [VIDEO] is pressed, the video output signal is changed.

3.After you see normal screen, you have to save video configu- rations of the player.

TTV Video	Player Video	Connection Jack	Video Cable Type
Input Mode	Output Mode	of TV, Player
Normal Video	TV Out: NTSC C/S-Video	CVBS or Composite	Yellow RCA Cable
	(HD Component OFF)	Jack	(Supplied)
	TV Out: PAL C/S-Video	(Generally Yellow
	(HD Component OFF)	Jack)
S-Video	TV Out: NTSC C/S-Video	S-Video Jack	S-Video Cable
	(HD Component OFF)		* Black rounded
	TV Out: PAL C/S-Video
	(HD Component OFF)
Component 480i	TV Out: NTSC C/YPbPr	Component 3 Jack	Component Cable
	(HD Component OFF)	* Y(Green), Pb(Blue),	* Y(Green), Pb(Blue),
		Pr(Red)	Pr(Red)
	TV Out: PAL C/YPbPr
	(HD Component OFF)
Component 480p	HD Component Out On
	480p
Component 720p	HD Component Out On
	720p
Component 1080i	HD Component Out On
	1080i

NTSC, PAL : Standard of TV Output. Select the corret one for use in your country.

51