Connect & Disconnect from PC
CONNECT THE MEDIA PLAYER TO COMPUTER
1.Slide the power/lockswitch up to power on the media player. Wait until the main screen displays. The DMP040 will require use of the AC Power Adapter.
Power/Lock Switch
2.Plug the
USB Port
3.Once connected to your computer, the media player should be detected by your computer operating system automatically. You will see the following two messages on the DMP740 (no display on the DMP040).
NOTE: While the first message temporarily displays below and the com- puter is connected to the DMP, DO NOT press the REC button! This activates the automatic download function (the entirety of the PC hard drive will start to download to the DMP!
© 2005 Directed | 19 |