Actiontec electronic MWTV200KIT01 user manual LEDs are ashing

	MyWirelessTV User Manual
4.	Watch the Power and Sync LEDs of the device ash for 2-3 minutes.
	Do not power down the device or remove the USB thumb drive while
	the LEDs are ashing.
5.	A er the LEDs turn o brie y, the Power LED will ash, then glow
	solid green. When this occurs, remove the thumb drive from the
	MyWirelessTV device.
6.	Repeat steps 3-5 for all MyWirelessTV devices that need an update.

Once the rmware update has been applied to all MyWirelessTV devices,

perform a power cycle (turn o , then on) on all devices.	e
MyWirelessTV devices will pair automatically, streaming audio and
video. Perform another power cycle on all devices. e	rmware update
has been successfully applied.

28