Actiontec electronic MWTV200KIT01 user manual Troubleshooting, Frequently Asked Questions

Page 30

Troubleshooting

is chapter will describe some problems you may encounter using MyWirelessTV, and the possible solutions to those problems. Also included are frequently asked questions, and the answers the questions.

Frequently Asked Questions

Why can’t I see anything on the TV next to the Transmitter?

Check the cable connection from the external source (i.e., cable/ satellite set top box, Blu-ray player) to the Transmitter and from the Transmitter out to the HDTV.

Why can’t I see anything on the TV, even though all the cables are connected properly?

Make sure the external source device is powered on and the correct source input is selected on your HDTV.

Why can’t I see anything on the TV next to the Receiver?

Check the cable connection from the MyWirelessTV Receiver out to the HDTV. Also, make sure the correct source input is selected.

Why can’t I control my external source device from my second HDTV?

Make sure the IR Blaster sensor is pointed directly to the external source device’s IR sensor window. Also, check that the Receiver or the IR Extender cable is in line-of-sight of the remote control.

Image 30

Contents MyWirelessTV Table of Contents General LED Indicators GPL License TroubleshootingFrequently Asked Questions Speci cationsIntroduction Minimum System RequirementsFeatures Product Contents Getting To Know MyWirelessTV MyWirelessTV TransmitterTransmitter Front Panel Page Transmitter Rear Panel MyWirelessTV Receiver Receiver Front PanelReceiver Rear Panel Connecting MyWirelessTV Connecting the MyWirelessTV TransmitterConnecting the MyWirelessTV Receiver Setting Up IR Control Connecting the IR Extender CableConnecting the IR Blaster Cable Typical MyWirelessTV Connection Con guration TransmitterConnecting to a Computer as a Source Device ReceiverUsing USB Backchannel Using the MyWirelessTV Graphical User Interface Remote ControlMenu ButtonsSelect Source Shortcut Direction Up, Down, Left, RightBack InformationExit Graphical User Interface Select Source Con gure Add TransmitterLabel Transmitter Delete TransmitterLabel Receiver General Settings LanguageLatency Mode Wireless Channel Advanced Settings System InformationUpdating MyWirelessTV Firmware Reset to FactoryLEDs are ashing Why can’t I see anything on the TV next to the Transmitter? TroubleshootingFrequently Asked Questions Why can’t I see anything on the TV next to the Receiver?Page What is the remote control used for? Video Speci cations Speci cationsGeneral Technical Speci cationsLED Indicators GPL License