Philips WAJ260 user manual Digital tuner Alarm, Using the alarm

Digital tuner Alarm

Digital tuner

Tuning to radio station

1Press RADIO ON/OFF to switch on the radio (FM only).

➜The radio station frequency and the wave- band will be displayed. (See 3).

2Press and hold TUNING +/- until the frequency in the display starts running.

➜The radio automatically tunes to a station of sufficient reception.

3Repeat step 2 if necessary until you find the desired station.

•To tune to a weak station, press TUNING +/- briefly and repeatedly until you have found optimal reception.

To improve reception:

FM: Extend and adjust the pigtail for optimum reception.

Programming radio stations

You can store up to a total of 10 radio sta- tions in the memory (10 FM) manually or automatically (Auto store). Any previous pre- sets will be erased.

Manual programming

1Tune to your desired station (see Tuning to radio stations).

2Press and hold PRESET +/- to activate pro- gramming.

➜ Display: PRSET flashes.

3Press PRESET +/- once or more to allocate a number from 1 to 10.

4Repeat steps 1-3 to store other stations.

Helpful hints:

–You can erase a preset station by storing another frequency in its place.

Autostore

Autostore automatically starts programming radio stations from preset 1. Any previous

presets e.g. manually programmed will be erased.

1In radio mode, press AUTO SCAN/DATE until the frequency in the display starts running.

➜Available stations are programmed (FM). After all stations are stored, the first auto- store preset station will then automatically play.

To listen to a preset or autostore station

Press the PRESET +/- buttons once or more until the desired preset station is dis- played.

Using the alarm

AJ260 allows you to simultaneously set two different alarms (ALARM 1 and ALARM 2 ) which can go off in the radio or buzzer mode.The clock time needs to be set correctly before using alarm.

Setting alarm time

1Press briefly ALM 1 or ALM 2 to display AL1 or AL2 icon.

2Press and hold ALM 1/ ALM 2 for two seconds.

➜The hour digits flash.

3Hold down or press TUNING +/- repeat- edly to adjust the hours.

4Press ALM 1/ALM 2 to confirm the setting.

➜AL1/AL2 icon and the minute digits flash.

5Hold down or press TUNING +/- repeat- edly to adjust the minutes.

6Press ALM 1/ALM 2 to confirm the setting.

Helpful hints:

–In standby mode, press DATE to display month and day information. In radio mode, to display alarm time, press ALM 1/ALM 2.

Selecting alarm mode (activating)

1Press RADIO ON/OFF to switch to stand- by.

2Select your choice of alarm mode: either radio, or buzzer by using the RADIO•BUZ slider.

3Press ALM 1/ALM 2 once or more to display .

➜ When alarm is activated, is displayed.

(See 4).

•At the set alarm time, radio or buzzer will switch on automatically.