Philips WAJ260 user manual Sleep Weather forecast, On/Off, Repeat ALARM/BRIGHTNESS

Sleep		Weather forecast
Switching off the alarm
	Weather forecast
There are three ways of switching off the
	The unit is capable of detecting atmospheric
alarm. Unless you choose to cancel the alarm
	pressure changes. Based on the collected
completely, the DAILY ALARM RESET option
	data, it can predict the weather in the next
will be automatically kept activated from the
time your alarm first goes off.	12 to 24 hours.The effective range covers an
call at the same time for the following day:	area of approximately 30 to 50 km.
Daily alarm reset
		Weather may get better.
If you want the alarm to be stopped
		Weather is in steady state.
immediately but also wish to repeat the alarm

1 During the alarm call, press once			Weather may get bad.
	SLEEP/ALARM RESET or RADIO
	ON/OFF.		• Each weather forecast status will be displayed
	Repeat alarm		with graphical animation and different lighting
			colors at the top left hand corner of the unit,
	This will repeat your alarm call at 9-minute
			see the figure below.
1	intervals.
	During the alarm call, press		About color lighting
	REPEAT ALARM/BRIGHTNESS		– Battery operation:The light turns on for 10
	CONTROL.
			seconds after each atmospheric measure-
	Switching off the alarm completely		ment, or after any button pressed.
	Press once or more corresponding		– AC operation:The light always turns on
	ALM 1 or ALM 2 until	disappears.	when the power is switched on.To let the
			light turn on just like the case of battery
	Sleep		operation mentioned above, press and hold
			REPEAT ALARM/BRIGHTNESS
	The clock radio has a built-in sleep timer,
			CONTROL for about 10 seconds.
	which enables the set to be automatically
	switched off during radio playback after a set		LCD display	Light
	period of time.
				color
	Setting the sleep time			Amber
1 During radio playback, set your timer by			Sunny
	pressing repeatedly SLEEP until the desired
	timer option appears.		Partly cloudy	Light blue
	➜ Selections are follows (time in minute)
	10=20=30=60=90=120=OFF=
	10		Cloudy	Blue
2 The set will turn off automatically at the
	selected time.
3 To cancel the timer function, either			Rainy	Purple
	press SLEEP once or more until “OFF”
	appears, or press RADIO ON/OFF to		Stormy	Red
	switch to standby.
	➜ “SLEEP” disappears when sleep function is
	cancelled.		Snow	White

Note:

–The sleep function does not affect your alarm time setting(s).