Philips ORT7500 Listen to DAB radio stations, For the first time use, Program radio stations

Page 12

5Listen to DAB radio stations

Note

•• For optimal reception, fully extend the antenna and adjust its position.

•• You can program a maximum of 30 DAB radio stations.

•• Check with local retailer or go to www.WorldDAB.org for applicable DAB radio frequencies in your area.

For the first time use

1Turn the SOURCE knob to switch the product to DAB mode.

2Turn the knob until the [Full scan] menu is displayed.

3Press the knob to activate the automatic search.

»»This product automatically stores radio stations with sufficient signal strength.

»»After the search is complete, the first stored radio station is broadcast automatically.

4Turn the knob to select a station, and then press the knob to start listening.

Tip

•• You can re-scan to update the list of stored stations (see "Use DAB menus" > "Re-scan for stations").

•• You can tune to a station manually (see "Use DAB menus" > "Tune to a station manually").

About special symbols

Some symbol may be displayed before the name of a station.

•H:The station is one of your 10 favorite stations.

•?:The station is unavailable or inactive.

•:The station is a primary station with secondary service.

•:The station is a secondary station.

Program radio stations

1Tune to a DAB radio station.

2Press PROGRAM to activate the programming.

3Turn the knob to select a preset sequence number.

4Press the knob to confirm.

»»The radio station is stored with the selected sequence number.

5Repeat steps 1-4 to program more radio stations.

•To tune to a preset radio station, turn the PRESET knob until its frequency is displayed.

Note

•• If you store a radio station with the sequence number of another one, the earlier one is overwritten.

Display DAB information

On the display of DAB broadcasting, the first line shows station name, and the second line shows the service information for the current station.

Press INFO repeatedly to cycle through the following information (if available).

•Dynamic label segment (DLS)

•Signal strength

•Program type (PTY)

•Ensemble name

•Frequency

10EN

Image 12

Contents Always there to help you Page Contents Safety Important notes for users in the U.KHow to connect a plug Your DAB+ Radio IntroductionWhats in the box Overview of the product ScanConnect power Get startedTurn on Set the clockListen to FM radio stations Search for a radio station automaticallySearch for a radio station automatically Program radio stations manually Display RDS informationRDS program types Adjust FM settings Scan settingAudio setting System menusAbout special symbols Listen to DAB radio stationsFor the first time use Program radio stationsUse DAB menus Tune to a stored stationRe-scan for stations Tune to a station manuallyReset the product Upgrade the softwareUse system menus Check the current software versionListen to an external device Play audio via Bluetooth Turn the Source knob to switch the product to BT modeDevices Volume AdjustCharge your Bluetooth General informationTuner AmplifierTroubleshooting About Bluetooth connectionGeneral Compliance Care of the environmentTrademark notice CopyrightPage 20 EN