Philips ORT7500 Play audio via Bluetooth, Turn the Source knob to switch the product to BT mode

Page 16

8Play audio via Bluetooth

With this product, you can stream audio from a Bluetooth player.

An application Philips DigitalRadio is available on Apple App Store and Google Play.To fully enjoy features of this product, download and install the application to your smart device.

Note

•• Philips does not guarantee the compatibility with all Bluetooth devices.

•• Before pairing a device with this system, read its user manual for Bluetooth compatibility.

•• The product can memorize a maximum of 4 paired devices.

•• Make sure that Bluetooth function is enabled on your

device, and your device is set as visible to all other Bluetooth devices.

•• The operational range between this system and a Bluetooth device is approximately 10 meters (30 feet).

•• Any obstacle between this system and a Bluetooth device can reduce the operational range.

•• Keep away from any other electronic device that may cause interference.

Note

•• / If the connected Bluetooth device supports the Advanced Audio Distribution Profile (A2DP), you can listen to tracks that are stored on the device through the system.

•• If the device also supports the Audio Video Remote Control Profile (AVRCP), you can control play on this product.

•• If the connected device does not support the AVRCP, control play on the connected device.

1Turn the SOURCE knob to switch the product to BT mode.

»»If no Bluetooth device is connected, [Bluetooth No Connection] (No Bluetooth connection) scrolls.

2On your device, search for Bluetooth devices. In the device list, select ORT7500.

If a message prompts for the permission for Bluetooth connection with ORT7500, confirm it.

»»If the connection succeeds, [BT Connected] is displayed on the LCD display of this product.

3Play a track on the connected device.

To pause or resume play, press .

To skip to the previous or next track, press / .

14EN

Image 16
Contents Always there to help you Page Contents Safety Important notes for users in the U.KHow to connect a plug Introduction Your DAB+ RadioWhats in the box Overview of the product ScanConnect power Get startedTurn on Set the clockSearch for a radio station automatically Listen to FM radio stationsSearch for a radio station automatically Display RDS information Program radio stations manuallyRDS program types Adjust FM settings Scan settingAudio setting System menusAbout special symbols Listen to DAB radio stationsFor the first time use Program radio stationsUse DAB menus Tune to a stored stationRe-scan for stations Tune to a station manuallyReset the product Upgrade the softwareUse system menus Check the current software versionListen to an external device Play audio via Bluetooth Turn the Source knob to switch the product to BT modeAdjust Devices VolumeCharge your Bluetooth General informationTuner AmplifierAbout Bluetooth connection TroubleshootingGeneral Compliance Care of the environmentTrademark notice CopyrightPage 20 EN