Philips ORT7500 user manual Get started, Connect power, Turn on, Set the clock

Page 8

•Press to enter or exit FM or DAB menus.

ILCD screen

JAC MAIN~

•Connect to the AC power cord.

KAUDIO IN

•Connect to an external device by an audio in cable.

LDAB SOFTWARE

•The socket for firmware upgrade

M

•USB socket,charge the device only

NAntenna

3 Get started

Always follow the instructions in this chapter in sequence.

Connect power

Connect the AC power cord to the AC MAIN~ socket and then to the wall outlet.

Turn on

Press the knob or turn the SOURCE knob.

»»The product switches to the last selected source.

•To switch the product to standby mode, press the knob again.

Set the clock

1In standby mode, press and hold the knob for 2 seconds.

»»(12-hour time format) or

(24-hour time format) blinks.

2Turn the knob to select a time format, and then press the knob to confirm.

»»Hour digits blink.

3Turn the knob to set the hour, and then press the knob to confirm.

6EN

Image 8

Contents Always there to help you Page Contents Safety Important notes for users in the U.KHow to connect a plug Whats in the box Your DAB+ RadioIntroduction Overview of the product ScanConnect power Get startedTurn on Set the clockSearch for a radio station automatically Listen to FM radio stationsSearch for a radio station automatically RDS program types Program radio stations manuallyDisplay RDS information Adjust FM settings Scan settingAudio setting System menusAbout special symbols Listen to DAB radio stationsFor the first time use Program radio stationsUse DAB menus Tune to a stored stationRe-scan for stations Tune to a station manuallyReset the product Upgrade the softwareUse system menus Check the current software versionListen to an external device Play audio via Bluetooth Turn the Source knob to switch the product to BT modeCharge your Devices VolumeAdjust Bluetooth General informationTuner AmplifierGeneral TroubleshootingAbout Bluetooth connection Compliance Care of the environmentTrademark notice CopyrightPage 20 EN