CD/ RADIO | SETTING ALARM OPTIONS |
SWITCHING OFF ALARM
Selecting a different track during playback
The track number appears briefly in the display when you press SEARCH ∞ or § to skip tracks.
•Press SEARCH § once or more to skip to the next track(s).
•Press SEARCH ∞ more than once to skip to previous tracks.
•Press SEARCH ∞ once and playback will return to the beginning of the current track.
Finding a passage within a track
1During playback, press and hold down SEARCH ∞ or §.
™The CD is played at high speed and low volume; the display will show Cd: and your current track number.
2Release SEARCH ∞ or § when you recognize the passage you want.
™Normal CD playback and standby clock time resumes.
RADIO
1Press ON/ OFF to switch on the radio.
™tu is displayed briefly followed by the clock time RADIO , and the last selected waveband.
2Press FM/ AM if you wish to change waveband.
3Adjust the sound using VOLUME $ or 3.
4Adjust the TUNING wheel to tune to a radio station.
To improve reception:
FM: Extend pigtail at the back of the set fully for optimum reception.
AM: uses a
5Press ON/ OFF to switch off the radio.
™RADIO and the waveband disappear from the display.
SETTING THE ALARM OPTIONS
General
Two different alarm times, ALARM 1 or 2 can be set in the CD, radio or buzzer modes. This can be useful when for example you need to be woken up at a different time during the week and at the weekend.
-Remember to first set the DAY, clock and alarm time functions correctly!
-Make sure your selected alarm symbol is shown.
Viewing the Alarm Mode Options
1Select your choice of alarm mode by pressing ALARM 1 or ALARM 2 MODE/ OFF once or more to find your respective mode.
™ The alarm mode display sequence is shown:
–Lo:00 – default volume level for start of gentle wake alarm
–H1:16 – default maximum volume level for gentle wake alarm
–Followed by the 3 different alarms: (buzzer) k AL, or
(radio) m tu, or
CD mode 
with CD and a track number
2Read the following chapters to adjust or select the respective modes.
Adjusting the Gentle Wake Volume
A sure way of getting up in the mornings, the gentle wake volume for the alarm begins from gentle volume e.g Lo:00 (low) and gradually increases to a higher volume e.g. H1:11.
The default volume range is Lo:00 and H1:16. If you wish to change the default volume for the buzzer, radio or CD alarm:
1In the standby mode, press ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF once.
2As soon as Lo:00 appears, press 7 or 8 once or more to adjust the starting volume of your alarm.
3To set the maximum volume for your alarm, press ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF again to change to the H1:16 display.
4As soon as H1:16 appears, press 7 or 8 until you reach the desired volume level
Notes:
•The HI volume is always greater or equal to the Lo volume: e.g.i. Lo:15, H1:19
e.g.ii. Lo:12, H1:12
•The starting volume is Lo:00, with a possible low volume range
10-32.
•The gentle wake volume settings do not affect normal CD and radio playback volume level.
•It is not possible to review the gentle wake volume range during the active alarm call as pressing ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF cancels the alarm completely.
•During the alarm call, if you press 7 or 8 the high volume stops increasing immediately.
Selecting Buzzer or Radio Alarm
•Press ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF repeatedly until the (buzzer) k AL or (radio) m tu display is shown.
Note:
If you have selected the radio alarm m tu, make sure you have tuned properly to a station.
CD Alarm Mode: Selecting a CD track
You can program and select a CD track number between
However, if the track number programmed does not exist on your CD, the CD will start playback from the first track during the alarm call.
1Insert a CD into the CD compartment.
2Press ALARM 1 MODE/ OFF or
ALARM 2 MODE/ OFF repeatedly until the CD and track number display is shown.
See figure 3.
3As soon as the CD alarm display appears,
press 7 or 8 until the desired track number is shown. ™ The display returns to standby clock time.
4To review your programmed track number, press ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF again repeatedly until the CD alarm display is shown.
Note:
•The buzzer alarm option will automatically replace the CD alarm if you have:
–inserted a CD incorrectly;
–inserted a damaged CD;
–forgotten to insert any CD;
–not closed the CD door properly.
SWITCHING OFF THE ALARM
There are three ways of switching off the alarm. Unless you cancel the alarm completely, the 24 HOUR ALARM RESET will be automatically selected after 59 minutes, from the time your alarm time first goes off.
24 HOUR ALARM RESET
If you want the alarm mode to be stopped immediately but also wish to retain the same alarm setting for the following day:
•Press from 3 possible options according to your selected alarm:
a 24 HR RESET to switch off the buzzer, radio or CD alarms
b STOP 9 CD alarm only
c ON/ OFF radio alarm only.
™You will hear a beep tone confirming 24 hour reset activation.
CANCELING THE ALARM COMPLETELY
To cancel the set alarm time before it goes off, or during the alarm call:
•Press ALARM 1 MODE/ OFF or ALARM 2 MODE/ OFF once or more until the selected alarm indicator disappears from the display.
™If you cancel the alarm during the alarm call, you will also hear a beep tone confirming the alarm has been cancelled.
REPEAT ALARM
This will repeat your alarm call at
•During the alarm call,
press REPEAT ALARM/ BRIGHTNESS CONTROL.
•Repeat if desired up to an hour.
Notes:
• The selected alarm mode k, m , or 
indicators will