Basic functions
Switching on/ to standby and selecting functions
1Press POWER to switch on
➜The set switches to the last source selected
➜The display lights up
2To select your function, press CD/AM/FM once or more (or CD or RADIO on the remote control)
3Press POWER to switch the set to standby ➜ The display dims out
Helpful hints:
–In the standby mode, the tone, sound settings, tuner presets, and the volume level will be retained in the set’s memory.
Adjusting volume and sound
Adjusting Volume
●Press VOLUME
➜ VOL and the actual value (between 00 and 31) are displayed
DBB
●On the set, press DBB (Dynamic Bass Boost) once or more to switch bass enhancement on
or off.
➜ DBB appears if DBB is activated
MUTE
During playback, you can temporarily switch off the sound without switching off the set
1Press MUTE to switch off the sound
➜MUTE appears. Playback continues without sound
2To switch on the sound, press MUTE again or
adjust the volume with VOLUME controls ➜ MUTE disappears
Display information
1During playback, press DISP to switch between the clock/timer display and the status of the set
2In the standby mode, press DISP to lights up the clock display
➜15 seconds later, the display dims out
automatically |
English
11