Installation, Mounting the set under a cabinet

Installation

●Ask a friend to help out. An extra hand to hold the set makes mounting easier and quicker.

●You may install the unit in the kitchen with or without spacers.

aFind a mounting location near a wall outlet.

– To reduce the risk of fire, do not place any heating or cooking appliance beneath the set.

–To prevent obstruction or danger, use the power cord posts to wrap the power cord so that excess cord does not hang down.

	Template
	a
	b
		Power supply
		This set runs on AC power.
	b Use the mounting template to test the design	We recommend you also insert a 9V battery for
	b Use the mounting template to test the design	memory back-up power supply. In the event of a
	and thickness of your kitchen cabinet bottom.	memory back-up power supply. In the event of a
	and thickness of your kitchen cabinet bottom.	power interruption, this will help safeguard the
		power interruption, this will help safeguard the
	Mounting the set	clock, timer settings and preset radio stations.To
	Mounting the set	save energy, the display switches off and you will
		save energy, the display switches off and you will
	For full details on how to use the Mounting kit,	not be able to operate the CD/ Tuner functions.
	please refer to the printed instructions in the	Backup battery (not included)
	Quick Start Guide and Template.	Backup battery (not included)
	Quick Start Guide and Template.

	● Insert 1 x 9V battery (preferably alkaline) with
IMPORTANT!	the correct polarity
IMPORTANT!
– Never plug in the AC power cord to	Helpful hints:
the power outlet before installation is	– Replace the batteries once a year, or as often
completed.	as necessary.
– Install your set near the AC outlet and
where the AC power plug can be reached	Batteries contain chemical substances, so
easily	they should be disposed of properly
– Do not use a converter or extension
– Do not use a converter or extension		AC power
cord.		AC power
- Install the set as far as possible from	● Connect the AC power cord to the wall socket.
sources of interference, such as a	● Connect the AC power cord to the wall socket.
sources of interference, such as a	This switches on the power supply
refrigerator, microwave oven, fluorescent	This switches on the power supply
refrigerator, microwave oven, fluorescent
lamp, etc.	The type plate is located on the bottom
– There should be at least 2.5" distance	The type plate is located on the bottom
– There should be at least 2.5" distance	panel.
between the unit and the wall.	panel.
between the unit and the wall.