To change the Alarm Mode setting for Alarm 1, hold the ALARM 1 setting button and press the MODE button until the DAY OF WEEK indicators show the desired mode setting, Weekdays only, Weekends only, or Everyday operation.
Release the MODE and ALARM 1 setting buttons, the display will return to the correct time. Follow the same procedure to select the desired Alarm Mode for Alarm 2 if necessary.
Checking The Wake Up Times And Alarm Mode
Whenever you want to check the wake up time or the alarm mode settings, simply press either the ALARM 1 or ALARM 2 setting button. The display will change from correct time to wake up time and the DAY OF WEEK indicators will show you the alarm mode which is currently selected.
Release the ALARM 1 or ALARM 2 setting button to return to correct time.
Listening To The Radio
1.Set the Band selector to the desired band, AM (530
2.Set the VOLUME control to a low setting.
3.Press the RADIO ON/OFF button to turn the radio ‘On’. Radio frequency will be shown on display for 3 seconds.
4.Select your desired station with the TUNING control.
5.Adjust the VOLUME control to the desired setting.
6.When you are finished listening, press the RADIO ON/OFF button to turn the radio “ Off ”.
Antenna Information
AM – The AM bar antenna is inside the cabinet. If AM reception is weak, change the position of cabinet until the internal antenna picks up the strongest signal.
AM | FM |
FM – The FM antenna is built into the AC power cord. If FM reception is weak try varying the position and direction of the AC power cord until you find the strongest signal.
9