Manual Time Adjustments

Some people like to set their clocks 5 to 10 minutes fast to make sure that they will always be on time. Even though the SmartSet® sets the time by itself, you still have the option of adjusting the time manually if you wish.

To manually adjust the time display press and hold the TIME button, and press either the SET or button to adjust the time display ahead or back as desired.

Each press of the SET or button will change the display by one minute. If you hold the SET button the display will continue to change. The display will change slowly at first, one minute at a time. If you continue holding the SET or buttons the display will change rapidly.

NOTE: If you manually adjust the time, your new setting is entered into the SmartSet® memory. If the power is interrupted, the display will return to your new setting, not the original setting, when the power is restored.

Adjusting The Wake Up Times

Your SmartSet® clock radio has two separate alarms that can be set and used independently. You may use the alarms to wake two people at different times, or you may use one alarm for weekdays and the other for weekend wake up times. The procedure for adjusting the wake up time is the same for both Alarm 1 and Alarm 2.

1.Press and hold either the ALARM 1 or ALARM 2 setting button.

The display will change from the correct time to the Alarm 1 or Alarm 2 wake up time.

2.While holding the ALARM 1 or ALARM 2 setting button, press either the SET or button to move the display ahead or back to your desired wake up time.

3.When the desired wake up time appears on the display, release the SET or button. NOTE: Be sure that you have set the wake up time correctly by observing the AM indicator. If the AM indicator is ‘On’ the wake up time is “AM”. If the AM indicator is ‘off’, the wake up time is “PM”.

4.When the desired wake up time (AM or PM) appears on the display, release the ALARM 1 or ALARM 2 setting button.

Selecting The Alarm Mode

Your SmartSet® clock radio allows you to select from among three different alarm operation modes for either alarm. The alarm modes are:

zEveryday – the alarm will turn on all 7 days.

zWeekdays only – the alarm will only turn on Monday through Friday:

zWeekends only – the alarm will only turn on Saturday and Sunday;

To check the Alarm Mode setting for Alarm 1, press the ALARM 1 setting button. The display will show the Alarm 1 wake up time and the DAY OF WEEK indicators will show you the alarm mode which is selected.

zIf all 7 indicators are ‘On’, the Everyday mode is selected.

zIf only the MON (Monday) through FRI (Friday) indicators are ‘On’, the Weekdays only mode is selected.

zIf only the SAT (Saturday) and SUN (Sunday) indicators are ‘On’, the Weekends only mode is selected.