Wake To RADIO
1.Turn the radio ‘On’ and select the band, station, and volume level that you wish to hear when the alarm comes ‘On’, then turn the radio ‘Off” again.
2.Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms.
3.Set the ALARM selector switch for one or both alarms to the “RADIO” position. The appropriate AL1 and/or AL 2 indicators will light up to confirm that the alarms are set.
4.At the selected wake up time, the radio will turn ‘On’. It will play for one hour and then shut off automatically.
5.To stop the radio sooner, press either the appropriate ALARM 1 or ALARM 2 button, or press the RADIO ON/OFF button. The radio will stop but the alarm remains set and will turn the radio on again at the same time on the following day (depending on the Alarm Mode setting).
6.If you do not want the alarm to turn the radio on the following day, set the appropriate ALARM selector switch to the “OFF” position.
Wake To Buzzer (Crescendo Alarm)
NOTE: Alarm 1 and Alarm 2 have different buzzer sounds.
zAlarm 1 is a “Single beep” sound.
zAlarm 2 is a “Double beep” sound.
You will be able to tell which alarm is going off by the sound that it makes.
1.) Reconfirm the wake up time and alarm mode settings for the alarm you are using, Alarm 1, Alarm 2, or both alarms.
2.) Set the ALARM selector switch for one or both alarms to the BUZZER position. The appropriate AL1 and/or AL 2 indicator will light up to confirm that the alarms are set.
3.) At the selected wake up time the buzzer will sound. It will begin softly and gradually increase in volume to wake you up. It will continue for one hour and then shut off automatically.
4.) To stop the buzzer sooner, press either the appropriate ALARM 1 or ALARM 2 button. The buzzer will stop but the alarm remains set and will turn the buzzer on again at the same time on the following day (depending on the Alarm Mode setting).
To stop the buzzer and turn on the radio immediately, press the RADIO ON/OFF button twice instead of the ALARM 1 or ALARM 2 button.
5.) If you do not want the alarm to turn the buzzer on the following day, set the appropriate ALARM selector to the “OFF” position.
Radio And Buzzer Operation
You may also set one alarm for wake to Radio and the other for wake to BUZZER. Just set the ALARM 1 and ALARM 2 selector switches to the desired position.
Snooze/Repeat Alarm
After the alarm turns ‘On’ in the morning you can press the SNOOZE button on the top cabinet for a few extra minutes sleep.
The corresponding AL indicator will flash.
The alarm will stop for approximately 9 minutes and repeats.
The Snooze operation may be repeated several times if desired but after one hour the alarm will not come on again.
10