Manual Time Setting

If the receiver fails to detect the WWVB signal after several tries and you do not want to wait until the reception condition improves, you may also set the time manually as follows:

1.) Set the display to the correct year. Depress the DATE/MONTH and TIME buttons together. The Month/Date display will show the initial default year of 2001. Continue to press the DATE/MONTH and TIME buttons and press the “+” button to advance the year display to the correct year.

2.) Set the display to the correct month and date. Depress the DATE/MONTH button. The month/date display will show the initial default month and date of January 1st ( 1 01). Continue to press the DATE/MONTH button and press the “+” (or “–”) buttons to advance the month/date display to the correct setting. The Day indicator will change automatically to match the month/date display. You do not adjust the Day display separately.

3.) Set the display to the correct time. Depress the TIME/SECONDS button and the “+” or “–” buttons to move the display forward or backward to the correct time. The display changes slowly at first and then begins to change rapidly. If you pass the correct time simply press the “+” or “–” buttons to back up to the correct setting.

Notes:

•Be sure to observe the AM indicator to make sure you have set the time correctly. If the AM indicator is ‘On’the time displayed is “AM”. If the AM indicator is ‘Off’ the time displayed is “PM”.

•After setting the time recheck the month/date display. If you advanced the time past midnight (12:00 AM) the month/date display will change. Re-adjust the month/date display if necessary.

CKA1100_drafts052102.p6512

21/5/2002, 15:19