Listening to Radio, Sleep Operation

Listening to Radio

Setting up Antenna

1.Plug the AM antenna cable into the AM Loop Antenna Socket on the back of unit. Move antenna 12” away from unit for best reception.

2.Extend FM wire antenna fully for best reception. Do not strip, alter or attach to other antennas.

Tuning and Playing the Radio

1.Press the Radio Button to select radio play mode. Press as needed to select AM, FM1 or FM2 radio band.

2.Press << or >> Button to tune radio to a desired station.

3.To memorize the current station as a preset, press and hold Preset Button 1, 2, 3 or 4. Repeat step 1-3 to preset up to 12 stations (4 AM and 8 FM). To listen to a preset station at any time, simply press the desired preset button.

4.Press the Volume+ and Volume– Button on the iH12 or on the remote control to adjust the system volume.

5.To turn off the unit, press the Alarm Reset/Power On/Off Button on the iH12 or on the remote control to turn it off.

Sleep Operation

Sleep mode lets you sleep to your iPod or the radio, gradually lowering the volume until the unit shuts off at the selected time.

1.Press the Sleep Button to enter sleep mode. The Sleep Icon will appear on the display to indicate the unit is in sleep mode. The unit will automatically turn off after the selected time. Sleep mode has a Gentle Sleep feature which gradually lowers the volume 15 seconds before auto power off.

2.You can adjust the sleep timer from 120, 90, 60, 30 or 15 minutes by pressing the Sleep Button again.

3.When the display changes back to show the real time, press the Sleep Button once to show the sleep time remaining. Pressing it again will change the sleep time to the next lowest increment.

4.The iH12 has independent volume setting for sleep mode so you can adjust the sleeping volume without affecting the alarm volume. Press the Volume+ and Volume– Button on main unit or remote control to adjust the sleep volume. The sleep volume will remain at that level the next time you enter sleep mode until controls are changed.

5.To stop listening at any time, press the Alarm Reset/Power On/Off Button on the iH12 or on the remote control to turn it off.

Click Sound Operation

During normal operation, press and hold the Wake-to Button to set button click sound on or off. After the display shows “CLC”, press << or >> Button to set click sound on or off, then wait around 5 seconds to exit the setting mode.

3D Sound Operation

Repeatedly press the 3D Button on the remote to set 3D wide sound effect on or off, then wait around 5 seconds to exit the setting mode.