Listening to iPod
1.Dock the already playing iPod. The iH12 will automatically turn on and you will hear the music playing from your iPod. Note: If the playing song/music loudness is too low on the iPod itself, iH12 may not detect iPod is in play mode. Press the Play/Pause Button on main unit or remote control twice to play it.
2.When the iPod is docked and in standby mode, press the Play/Pause Button on the iH12 or on the remote control to play it. The iPod Icon will appear on the display, showing iPod playing mode.
3.Press the iPod Play/Pause Button again to pause play; press again to resume it.
4.Press the Volume+ and Volume– Button on the iH12 or on the remote control to adjust the system volume.
5.Press >> or << Button on the iH12 or on the remote control to go to the next or previous track. Press and hold while track is playing for high speed forward or reverse music search of the current track.
6.To turn off the unit, press the Alarm Reset/Power On/Off Button on the iH12 or on the remote control to turn it off. Your iPod will continue charging while in the dock.
Listening to
If you are using an iPod without a docking port or other MP3 player or portable audio device, you can play it through the iH12 via the
1.Plug one end of an audio patch cord (available at www.ihomeaudio.com) into the headphone or
2.Press the Radio/Aux Button on the iH12 or on the remote until the
3.Turn on and play your device.
4.Press the Volume+ and Volume– Button on the iH12 or on the remote control to adjust the system volume. You may need to adjust your device volume, too.
5.To turn off the unit, press the Alarm Reset/Power On/Off Button on main unit or remote control to turn it off. Please remember to turn off your device, too.
Dimmer Operation
During normal operation, press the Snooze/Dimmer Button to control the brightness of the LCD display.
7