Panasonic SC-VK860, SC-VK760 Using the timers, Setting the time, Using the play or record timer

To adjust speaker level during play

Effective when playing multi-channel audio or when Dolby Pro Logic II or Super Surround is turned on.

1 Press [CH SELECT] to select the speaker.

L C R RS LS SW

SW: Subwoofer

•You can adjust SW only if the disc includes a subwoofer channel.

•“SW” does not appear on the display and is not adjustable when Dolby Pro Logic II is turned on.

•“S” appears on the display when “MUSIC” or “MOVIE” is selected with Super Surround

(\ page 30). In this case, you can adjust both surround speaker levels at the same time using [5, ∞].

S : –6 dB to +6 dB

2 Press [5] (increase) or [∞] (decrease) to adjust the speaker level for each speaker.

C, RS, LS, SW: –6 dB to +6 dB

(L, R: Only the balance is adjustable.)

To adjust the balance of the front speakers

While “L” or “R” is selected, press [2, 3].

Using the timers

Setting the time

This is a 24-hour clock.

1	Press [CLOCK / TIMER] to select “CLOCK”.
	Every time you press the button:
			CLOCK		˚ PLAY			˚ REC
2				Original display
	(					)
		Within 7 seconds or so
	Press [4 , / REW] or [¢ ,						/ FF] to set the
	time.
3	Press [CLOCK / TIMER] to finish setting the time.

Displaying the time

Press [CLOCK / TIMER] once when the unit is on or in standby mode.

The time is displayed for a few seconds.

Note:

Reset the clock regularly to maintain accuracy.

Using the timers (continued)

Using the play or record timer

You can set the timer to come on at a certain time to wake you up (play timer) or to record from the radio or the external equipment (record timer).

Play timer and record timer cannot be used together.

Turn the unit on and set the clock.

•For the play timer, prepare the desired music source; cassette (DECK 2 has the priority), disc number (1 ~ 5), radio or external equipment, and set the volume.

•For the record timer, check the cassette’s erasure prevention tabs (\ page 27) and insert the tape in DECK 2 (\ page 27) and tune to the radio station (\ page 26) or select the external equipment

(\ page 32).

1	Press [CLOCK/TIMER] to select the timer function.
	Every time you press the button:
			CLOCK		˚ PLAY				˚ REC
				Original display
	˚PLAY : to set the play timer
	˚REC : to set the record timer
	(Proceed to the next step						within 7 seconds			)
2	(					)
		Within 7 seconds or so
	Press [4 , / REW] or [¢ ,							/ FF] to set the
	“ON” time.
3	Press [CLOCK / TIMER] to confirm.
4	Repeat steps 2 to 3 to set the “OFF” time.

To activate the timer

5 Press [ ˚PLAY/REC] to display the timer’s indicator.

Every time you press the button:

˚ PLAY ˚ REC

(off)

˚PLAY : to turn the play time on

˚REC : to turn the record timer on

(The indicator does not appear if the start and fi nish times or the clock has not been set.)

6 Press [y] to turn off the unit.

The unit must be off for the timers to operate.

To change the settings

Perform steps 1 to 4 and 6 (\ see above).

To change the source or volume

When the unit is on

1	Press [ ˚PLAY/REC] to clear the timer indicator
	from the display.
2	Make changes to the source or volume.
3	Perform steps 5 and 6 (\ see above).

OTHER OPERATIONS DANSKENGLISH

FRANÇAIS

LANG - 4

LANG - 5

RQTV0239

31

RQTV0239_1L.indd 31 6/12/07 12:36:44 PM