TV OPERATION
Memorizing the channels
Storing channels in memory
Your TV can memorize and store all of the channels you can receive. Once these channels are in memory, you can use the CH ▲ and CH ▼ buttons to quickly scan through the available channels.
11 Press MENU repeatedly until you see the Setup menu.
Video 
Channels
3Press VOL +. The TV will begin memorizing all of the stations.
The TV cycles through the channel numbers and memorizes the available channels. This takes one to two minutes. When the TV is finished, it will display the “Memorize channels” screen.
✓Press MENU at any time to interrupt the memorization process and return to normal viewing.
Time
Memorize 
to begin
Add/Erase
44 Press MENU twice to clear the screen.
Fine tune
Caption
Setup Language
2Press VOL+. You will see a screen for selecting the kind of antenna or cable system you connected. If you connected an antenna, leave “Antenna” highlighted. If you connected cable, press CH ▼ to highlight the type of cable you have: STD, HRC, or IRC.
Memorize channels
Use the 
buttons to select
Antenna
Cable STD
Cable HRC Cable IRC (Option)
Press 
to memorize or "Menu" to cancel.
✓If you are not sure which type of cable system you have, contact your cable company.
Adding and Erasing Channels
A channel can be manually added to or erased from memory.
11 Press MENU repeatedly until you see the Setup menu. Press CH ▼ to highlight “Add/Erase.”
Video | Channels |
|
| Memorize |
|
Time | Add/Erase | to begin |
Fine tune |
| |
|
| |
| Caption |
|
Setup | Language |
|
22 Press VOL +. You will see the Add/Erase menu screen.
Add/Erase
ANT 11 Erased
Added
Press "Menu" to finish.
12CHAPTER THREE: TV OPERATION