Venturer PLV16070 instruction manual Troubleshooting guide, Symptom

Unit does not work.

No picture on the TV screen.

No sound.

Remote control does not work.

•Unplug the AC power cord and plug it back in.

•Check that the three-way switch is slid to “ON” position.

•Choose different channels on the TV set until the picture appears.

•Make sure the TV sound is not muted.

•Make sure the batteries are inserted correctly.

•Replace the batteries if they are exhausted.

•Remove any obstacles between the remote control.

•Use the remote near the unit.

•Point the remote at the remote sensor on the unit.

Can not watch a bilingual TV program in its secondary language.

Weak signal or channel not available.

TV can not receive signal from a connected Cable box or Satellite box.

Can I watch TV while holding the TV, or while traveling in a vehicle ?

•Make sure you have correctly selected the appropriate audio setting (see p. 11). Please note that not all TV stations broadcast a secondary language.

•Try to reposition the antenna.

NOTE: Optimal reception of over-the-air TV broadcasts is typically obtained using an external fixed antenna. Orientation and location of the antenna is typically critical for best results - if using indoors, you may find that placement of the antenna near a window, or in an elevated location, improves performance.

•Confirm that a Coaxial cable is connected properly to the TV and the Cable or Satellite box. Ensure that your Cable or Satellite box is configured to output a TV signal over a Coaxial cable.

•No - ATSC TV signals can’t be received satisfactorily while TV is in motion. The TV and Antenna should be stationary and positioned for optimal reception. Note: the Car Power Adapter is provided specifically for “tail-gating” usage.