connections
Connecting a TV Antenna / Cable / Satellite
To view television channels correctly, a signal must be received from one of the following sources:
-An indoor or outdoor aerial antenna
-A cable system
-A satellite system
Using | Removing | ||||
To optimize TV reception, try adjusting the | connecting a different antenna or a coaxial | ||||
orientation and position of the | cable, you need to remove the | ||||
antenna. | antenna first. | ||||
|
|
|
|
| Hold the |
|
|
|
|
| |
|
|
|
|
| and rotate the nut as shown below |
|
|
|
|
| to remove. |
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
|
|
Using a Different Antenna |
|
| Cable TV (without a CATV converter) |
To TV ANTENNA terminal | Combination VHF/UHF antenna |
(cable not included) | (ATSC / NTSC signal) |
| |
| Separate VHF/UHF antenna |
| (ATSC / NTSC signal) |
| Auxiliary antenna |
| (included with this product) |
How to connect the Auxiliary Antenna
1. Hold the connector of auxiliary antenna and rotate the nut to the ANTENNA RF IN terminal on the side of the TV.
2.Remove the cap on the base of Auxiliary Antenna.
3.Hold the antenna rod of Auxiliary Antenna and rotate
the nut to the base until it is fastened. |
|
4. Extend the antenna rod and adjust position for |
|
optimal reception. | 3 |
|
- 7 -