Venturer PLV16070 Accessories, Remote control, To Install Batteries, Battery Replacement

	ACCESSORIES
Remote control with batteries	................................................................................................... x 1
Car power adapter	x 1
AC adapter	x 1
Auxiliary antenna	x 1

remote control

•Point the remote control at the REMOTE SENSOR located on the unit.

•When there is a strong ambient light source, the perform­ance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation.

•The recommended effective distance for remote operation is about 16 feet (5 meters).

To Install Batteries

1. Open the battery door.

2. Insert two AAA batteries.

Battery Replacement

When the batteries become weak, the operating distance of the remote control is greatly reduced and you will need to replace them.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.

Notes:

•If the remote control is not going to be used for a long time, remove the batteries to avoid corrosion damage caused by battery leakage.

•Do not mix old and new batteries. Do not mix ALKALINE, standard (CARBON-ZINC) or rechargeable

(NICKEL-CADMIUM) batteries.

•Always remove batteries as soon as they become weak.

•Weak batteries can leak and severely damage the remote control.

WARNING: Do not dispose of batteries in a fire. batteries may explode or leak.

Many universal remote controls have a “learning” feature. We recommend you use that feature to program the remote control.

For any questions or problems related to programming a universal remote control, you must contact the customer service department of the universal remote control manufacturer for assistance, or refer to the instructions included with the universal remote control. We cannot offer assistance in programming universal remote controls.

- 3 -