Connection, Using the flip-out Stand | Venturer PLV16070 guide

connection

NOTE

Optimal indoor reception of over-the-air TV broadcasts is typically achieved using an external fixed antenna. You may find that indoor reception is adequate using the direct-connect antenna. However, for your convenience, we’ve also included an additional antenna with a long cable to give you extra flexibility in antenna placement. In general, you’ll often find that placement of the antenna near windows, or at higher elevations, should improve reception. If you seek to further improve reception, we recommend you purchase the appropriate antenna that is suitable for your particular environment.

Connecting a Digital Antenna

The tuner in this TV receives ATSC TV signals from an antenna.

This digital TV can receive standard (SDTV) and high definition (HDTV) over the air broadcasts.

Using Headphones / Earphones

•Turn down the volume before connecting headphones to the unit, then adjust the volume to your desired level.

•When headphones are connected, no sound will come from the front speaker.

CAUTION:

Avoid listening to sound at high levels for prolonged periods of time. This may be harmful to you and may cause hearing loss.

Headphones / Earphones

(3.5mm diameter plug)

Using the flip-out Stand

The stand is located on the rear panel of the unit. Pull the stand out and rotate it to the maximum angle (shown as right).

- 8 -

Venturer PLV16070 Connection, Using the flip-out Stand, Connecting a Digital Antenna

connection

Connecting a Digital Antenna

Using Headphones / Earphones

Using the flip-out Stand