TV view operations
Channel selection
You can select channels by the following ways:
1 Press | . |
2Press number buttons on the remote control.
• e.g. To select 2 channel
viewingTV | Press 5 | 6 (Within about 1 second) |
| Press 2 |
|
| • e.g. To select 56 channel | |
To adjust the volume
Press +/– (Volume button).
The volume indicator will appear in the display. + : Increases the volume
The volume indicator will disappear if neither button is pressed for a few seconds.
To mute the sound
Press MUTE while pressing SHIFT.
The sound is silenced.
40 To restore the sound, do this operation again.
To display EPG (Electronic Programme Guide)
You can do the following operations on EPG.
■To view current program information Press EPG while pressing SHIFT then press
to select a channel.
The current program information of selected channel will be displayed.
■To view selected channel schedule for a week
(Where available)
After selecting a channel, press 
/ 
to select a day of a week.
■To reserve the program
Press 
/ 
to select the desired program then press
ENTER.
A mark will appear next to the selected channel and the program is reserved.
When the reserved program starts, the information display will appear to remind.
Press EXIT while pressing SHIFT to exit.
To display current channel information
Press INFO while pressing SHIFT.
The current channel information display will appear on the screen.
SD-P120DTKE_ENG_01-68.indd 40
2008/01/17 19:14:26