Before calling service personnel
Check the following guide for the possible cause of a problem before contacting service.
Symptom | Cause | Correction |
No power. | • The AC adapter or power plug is disconnected. | • Connect the AC adapter or power plug securely. |
| • The battery pack has been removed. | • Install the battery pack. |
| • Battery empty. | • |
The LCD turned off by itself. | • The automatic LCD off function turned the LCD off. | • Turn on the player again. |
No TV channels. | • The aerial is not connected. | • Connect the aerial properly. |
No TV channels after | • Channel scan is not fi nished. | • Redo channel scan. |
moving. |
|
|
Picture noises and | • Interference by wave refl ection or poor | • Change the position and direction of the aerial. |
distortion. | aerial connection. |
|
Dots on picture. | • Reception is disturbed by vibration. | • Move the aerial away from the cause of the interference. |
Stripes on picture. | • Interference by other electric | • Move the aerial away from the cause of the interference. |
| apparatuses. |
|
No picture on the LCD monitor. | • The AV OUT jack is connected. | • When you use the LCD of the player, unplug the AV OUT jack. |
No picture. (Other than | • The AV OUT jack is not connected to | • Confi rm the connection, and select the appropriate video input mode |
the TV monitor. | on the TV so the picture from the player appears on the TV screen. | |
No picture or Sound | • The aerial connection is improperly | • Connect the aerial properly. |
(When using the TV tuner.) | positioned. |
|
| • The channel scanning is not set to | • Set by scanning. |
| channels available in your area. |
|
No sound. | • The equipment connected via the | • Select the correct input mode of the audio receiver so you can listen |
| audio/video cable is not set to receive | to the sound from the player. |
| DVD signal output. |
|
| • The volume is too low. | • Adjust the volume by pressing the volume button. |
| • The audio receiver or TV is turned off. | • Turn on the equipment connected with the audio/video cable. |
| • The setting of output sound format is incorrect. | • Select the proper audio setting. |
Others
85
2008/01/17 19:15:11