Onkyo HT-R590 Asian models, Be careful that you dont injure yourself when, Using thumbtacks

Page 17

This section explains how to connect the supplied indoor FM antenna and AM loop antenna.

The AV receiver won't pick up any radio signals without any antenna connected, so you must connect the antenna to use the tuner.

 

North American and

Asian models

• Be careful that you don't injure yourself when

Brazilian models

 

 

 

 

FM75_

FM75£_

using thumbtacks.

 

¢

 

 

 

 

Insert the plug fully

Insert the plug fully

Insert wire,

Release,

into the jack.

into the jack.

Assembling the AM loop antenna

Thumbtacks, etc.

AM loop antenna (supplied)

Indoor FM antenna (supplied)

•Once your AV receiver is ready for use, you'll need to tune into a radio station and position the antenna to achieve the best possible reception.

•Keep the AM loop antenna as far away as possible from your AV receiver, TV, speaker cables, and power cords.

•If you cannot achieve good reception with the supplied indoor FM antenna, try a commercially available outdoor FM antenna instead.

•[f you cannot achieve good reception with the supplied indoor AM loop antenna, try using it with a commercially available outdoor AM antenna.

(Brazilian models)

Connect the supplied power cord to the AV

receiver's AC INLET.

To AC wall outlet

2 Plug the power cord into an AC wall outlet.

•Before connecting the power cord, connect all of your speakers and AV components.

•Turning on the AV receiver may cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into a different branch circuit.

•Do not use a power cord other than the one supplied with the AV receiver. The supplied power cord is designed exclusively for use with the AV receiver and should not be used with any other equipment.

•Never disconnect the power cord from the AV receiver while the other end is still plugged into a wall outlet. Doing so may cause an electric shock. Always disconnect the power cord from the wall outlet first, and then the AV receiver.

En

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents Iiiiiiiii HT-R590Adjust only Install IntoSafety Purpose Instructions Are provided For your safetyFor models having a power cord with a polarized plug PrecautionsPreventing Hearing Loss Caution FCC Information for UserInstalling the batteries Supplied AccessoriesAiming the remote controller Remote control sensor AV receiver 16 ft, 5 mContents Amplifier FeaturesProcessing ConnectionsTUNING, Preset 21 to 22, arrow and Enter Tuning Mode button 21 Display buttonMaster Volume control Music Optimizer button 32 Phones jack Front & Rear PanelsFor detailed information, see the pages in parentheses Muting indicator+ TrueHD DhL-uD Mstr ES 96124 Exp HEiMiMOpt PLxzEX Neo6 YAudysse y D nammEQVolBrazilian models Power cord North American and Asian modelsIN, Game IN, TV/CD @ Monitor OUT V jack AC Inlet Brazilian models@ button Remote ControllerRemote MODE/INPUT Selector buttons19 47 to Controlling the tunerConnecting the Speaker Cables Connecting the AV ReceiverBanana Plugs excluding Asian models Screw-type speaker terminalsSpeaker Connection Precautions Speaker ConfigurationUsing a Powered Subwoofer Number ChannelsConnected image with AV components Signal Cable JackAV Cables and Jacks DescriptionVCR or DVD recorder/Digital Video Recorder Audio return channel ARC functionSee Recording to make a connection for video recording @ How to record the videoInput MonitorRemote Control System On/Auto Power OnDirect Change VCR, DVD recorder Cassette tape deck, CDR, MD recorder, etcBe careful that you dont injure yourself when Using thumbtacksAsian models Turning On/Off the AV Receiver Press Receiver followed by O on the remote controllerPlayback Operating with the remote controller@ CH + Operating on the AV receiver@ Mode Standard Mode controlUsing the Tuner Extended Mode controlTuning into Radio Stations Auto tuning modeMode Using RDS Asian modelsPress Memory Finding Stations by Type PTY Displaying Radio Text RTEnter @ Listening to Traffic News TPMeasurement procedure Using Basic FunctionsWhen youve finished making the settings, press Listening Position @, and connect it to the Setup MIC jackTurn on the AV receiver and the connected TV 10Press EnterChanging the Speaker Setup Manually Error MessagesIigio,ii@-- Error message Speaker matching errorMUSIC----GAME MOVIE/TV--STEREO Game-Action*l Onkyo-Original DSP Listening ModesGame-Rock*l Studio-Mix*lSpeaker Layout 12.1113.1II5.1I Stereo Mono Multichannel Listening ModesDolby Pro Logic IIz Height Dolby EX HI.ItNillNilI-I NillNi11-l*2NilNNNil NilNNI-I2Input Listening ModeInfo*l Press Receiver followed by HomeFollowing information can typically be displayed You can adjust the brightness of the AV receivers DisplayRepeat this step to select the desired input display TV/CD --+ Dock t TapeRecording Separate AV Sources AV RecordingYou can temporarily mute the output of the AV receiver Press Receiver followed by MutingExplanatory Notes Advanced SetupVideo OUT BD/DVD, VCR/DVR, CBL/SAT, GAME, AUXTV/CD Front SubwooferSurround*l, Front Surround12dB to 0 dB to +12 dB in 1 dB step Multiplex/Mono SettingsDTS Setting Dolby SettingsTheater-Dimensional Setting PLIIz Height GainAudyssey Dynamic VolumeAudyssey Off Dynamic EQAbout Audyssey Dynamic Volume Preset Name For Input SelectorSync Audio SelectorOSD Setting Setting the Incoming Digital Signal Fixed ModeRemote Control Settings TunerHdmi Through Detects the signal and automatically selects the inputAudio TV Out Audio Return Ch ARCMenu Tone Control SettingsSpeaker Levels DB to 0 dB to +12 dB in 1 dB stepsMusic Optimizer Late Night FunctionCinemaFILTER OptimizerRI Dock IPod/iPhone Playback via Onkyo DockWith the RI Control Without the RI ControlREMOTEPress the appropriateMODE first Available buttonsTOP MENU*2 AITI41, Enter Playlist 4/= Repeat Random DISPLAY*3 MutingControlling Other Onkyo Components While holding down Remote Mode to whichOnkyo MD recorder without 71323 82990 Onkyo Dock without f/IBlu-ray Disc/DVD player with r411-11O Controlling a Blu-ray Disc/DVD Player, HD32910/33001/31612 Buttons Random ModeMenu Enter Display Muting @ Disc Menu @ Return @ Audio CLRHome TroubleshootingCantturn on the AV receiver Theres no sound Or itsvery QuietMThe front high or surround back speakers produce no sound Theresno picture from a source connected to an Hdmi Sound changes when I connect my headphonesVideo Attenuation How do I change the language of a multiplex sourceR I functions dont work Video Signal Flow Chart Blu-ray Disc/DVD player, etc Connection Tips and Video Signal PathMP3 .mp3 or .MP3 USB FeaturesMP4/.3GP or .3G2 Flac .flac or .FLACAbout Hdmi Toshiba REGZA-LINK compatible TV Sharp TV Using an RIHD-compatible TV, Player, or Recorder@ Players/Recorders @ For r-UHO-compatibleTV, projector, etc How to connect and setupOperate with the remote controller Amplifier Section General SpecificationsVideo Section Tuner SectionOnkyo Sound & Vision Corporation
Related manuals
Manual 60 pages 13.22 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents