Onkyo Receiver Troubleshooting Manual: Solutions for No Sound Problems
Page 50

Troubleshooting

If you have any trouble using the AV receiver, look for a solution in this section. If you can't resolve the issue yourself, contact your Onkyo dealer.

If you can't resolve the issue yourself, try resetting the AV receiver before contacting your Onkyo dealer.

To reset tile AV receiver to its factory defaults, turn it on and, while holding down VCR/DVR, press

ON/STANDBY. "Clear" will appear on the display and the AV receiver will enter Standby mode.

VOR/DVR

N When the power is restored after a power interruption, "CHECK SP WIRE" appears on the display

The protection circuitry has been activated.

Remove the power cord fl'om the wall outlet

immediately. Disconnect all speaker cables and input sources, and then leave the AV receiver with

its power cord disconnected for 1 hour. After that,

reconnect the power cord and set the volume to

maximum. [f the AV receiver stays on, set then the

volume to minimum, disconnect the power cord, and

reconnect your speakers and input sources. If the AV receiver turns off when you set the volume to

maximum, disconnect the power cord, and contact your Onkyo dealer.

Note that resetting the AV receiver will delete your radio presets and custom settings.

} Remote indicator

RECEIVER

i HOME

To reset the remote controller to its factory defaults, while holding down RECEIVER, press and hold down HOME until the remote indicator lights (about 3 seconds). Within 30 seconds, press RECEIVER

again.

N Can'tturn on the AV receiver

Make sure that the power cord is properly plugged

into the wall outlet.

N There's no sound,

or it'svery

quiet

 

Make sure

that the digital

input source

is selected

35

properly.

 

 

 

 

Make sure that the inputs and outputs of all

14-16

 

components

are connected

properly.

 

 

Make sure that the input source is properly selected. 19

Check the volume. The AV receiver is designed for 19

home theater enjoyment. It has a wide volume range,

allowing precise adjustment.

While a

pair of

headphones

is connected

to the

33

PHONES

jack,

no sound

is output from

the

 

speakers.

 

 

 

 

 

Check the digital audio output setting on the

connected device. On some game consoles, such as those that support DVD, the default setting is off.

If your

turntable

uses

an MC

cartridge, you must

15

connect an MC head amp, or an MC transformer.

 

Not all

listening

modes

use

all speakers.

27

N The AV receiver turns off unexpectedly

Make sure that the speaker setup microphone is not

When the set Auto Standby starts running, the AV 41

receiver will automatically go standby.

EB

still connected.

50

Page 49 Page 51
Image 50
Page 49 Page 51
Contents HT-R590 IiiiiiiiiSafety Purpose Instructions Install IntoAdjust only Are provided For your safetyPreventing Hearing Loss Caution PrecautionsFor models having a power cord with a polarized plug FCC Information for UserAiming the remote controller Supplied AccessoriesInstalling the batteries Remote control sensor AV receiver 16 ft, 5 mContents Processing FeaturesAmplifier ConnectionsMaster Volume control Music Optimizer button 32 Phones jack Tuning Mode button 21 Display buttonTUNING, Preset 21 to 22, arrow and Enter Front & Rear Panels+ TrueHD DhL-uD Mstr ES 96124 Exp Muting indicatorFor detailed information, see the pages in parentheses HEiMiMOpt PLxzEX Neo6 YAudysse y D nammEQVolIN, Game IN, TV/CD Power cord North American and Asian modelsBrazilian models @ Monitor OUT V jack AC Inlet Brazilian modelsRemote MODE/INPUT Selector buttons19 47 to Remote Controller@ button Controlling the tunerBanana Plugs excluding Asian models Connecting the AV ReceiverConnecting the Speaker Cables Screw-type speaker terminalsUsing a Powered Subwoofer Speaker ConfigurationSpeaker Connection Precautions Number ChannelsAV Cables and Jacks Signal Cable JackConnected image with AV components DescriptionAudio return channel ARC function VCR or DVD recorder/Digital Video RecorderInput How to record the videoSee Recording to make a connection for video recording @ MonitorDirect Change System On/Auto Power OnRemote Control VCR, DVD recorder Cassette tape deck, CDR, MD recorder, etcBe careful that you dont injure yourself when Using thumbtacksAsian models Press Receiver followed by O on the remote controller Turning On/Off the AV Receiver@ CH + Operating with the remote controllerPlayback Operating on the AV receiverStandard Mode control @ ModeTuning into Radio Stations Extended Mode controlUsing the Tuner Auto tuning modeMode Using RDS Asian modelsPress Memory Enter Displaying Radio Text RTFinding Stations by Type PTY @ Listening to Traffic News TPUsing Basic Functions Measurement procedureTurn on the AV receiver and the connected TV Listening Position @, and connect it to the Setup MIC jackWhen youve finished making the settings, press 10Press EnterIigio,ii@-- Error message Error MessagesChanging the Speaker Setup Manually Speaker matching errorMUSIC----GAME MOVIE/TV--STEREO Game-Rock*l Onkyo-Original DSP Listening ModesGame-Action*l Studio-Mix*lDolby Pro Logic IIz Height Dolby EX Listening ModesSpeaker Layout 12.1113.1II5.1I Stereo Mono Multichannel HI.ItNilNNNil NillNi11-l*2NillNilI-I NilNNI-I2Info*l Listening ModeInput Press Receiver followed by HomeRepeat this step to select the desired input display You can adjust the brightness of the AV receivers DisplayFollowing information can typically be displayed TV/CD --+ Dock t TapeYou can temporarily mute the output of the AV receiver AV RecordingRecording Separate AV Sources Press Receiver followed by MutingAdvanced Setup Explanatory NotesVideo OUT BD/DVD, VCR/DVR, CBL/SAT, GAME, AUXTV/CD Surround*l, Front SubwooferFront SurroundMultiplex/Mono Settings 12dB to 0 dB to +12 dB in 1 dB stepTheater-Dimensional Setting Dolby SettingsDTS Setting PLIIz Height GainAudyssey Off Dynamic VolumeAudyssey Dynamic EQSync Preset Name For Input SelectorAbout Audyssey Dynamic Volume Audio SelectorRemote Control Settings Setting the Incoming Digital Signal Fixed ModeOSD Setting TunerAudio TV Out Detects the signal and automatically selects the inputHdmi Through Audio Return Ch ARCSpeaker Levels Tone Control SettingsMenu DB to 0 dB to +12 dB in 1 dB stepsCinemaFILTER Late Night FunctionMusic Optimizer OptimizerWith the RI Control IPod/iPhone Playback via Onkyo DockRI Dock Without the RI ControlTOP MENU*2 AITI41, Enter Playlist 4/= Available buttonsREMOTEPress the appropriateMODE first Repeat Random DISPLAY*3 MutingOnkyo MD recorder without 71323 While holding down Remote Mode to whichControlling Other Onkyo Components 82990 Onkyo Dock without f/IBlu-ray Disc/DVD player with r411-11O Controlling a Blu-ray Disc/DVD Player, HD32910/33001/31612 Menu Enter Random ModeButtons Display Muting @ Disc Menu @ Return @ Audio CLRCantturn on the AV receiver TroubleshootingHome Theres no sound Or itsvery QuietMThe front high or surround back speakers produce no sound Sound changes when I connect my headphones Theresno picture from a source connected to an HdmiVideo Attenuation How do I change the language of a multiplex sourceR I functions dont work Connection Tips and Video Signal Path Video Signal Flow Chart Blu-ray Disc/DVD player, etcMP4/.3GP or .3G2 USB FeaturesMP3 .mp3 or .MP3 Flac .flac or .FLACAbout Hdmi @ Players/Recorders Using an RIHD-compatible TV, Player, or RecorderToshiba REGZA-LINK compatible TV Sharp TV @ For r-UHO-compatibleTV, projector, etc How to connect and setupOperate with the remote controller Video Section SpecificationsAmplifier Section General Tuner SectionOnkyo Sound & Vision Corporation
Related manuals
Manual 60 pages 13.22 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents