Onkyo HT-R590 Sync, Preset Name For Input Selector, Audio Selector, About Audyssey Dynamic Volume

About Audyssey Dynamic EQ®

Audyssey Dynamic EQ solves the problem of

deteriorating sound quality as volume is decreased by

taking into account human perception and room acoustics. Dynamic EQ selects the correct frequency response and surround levels moment-by-moment at any user-selected volume setting. The result is bass response, tonal balance, and surround impression that remain constant despite changes in volume. Dynamic EQ combines information from incoming source levels with actual output sound levels in the room, a prerequisite for delivering a loudness correction solution. Audyssey Dynamic EQ works well by itself. However, if Audyssey 2EQ® is on, the two technologies work in tandem to provide well-balanced sound for every listener at any volume level.

About Audyssey Dynamic Volume®

Audyssey Dynamic Volume solves the problem of large variations in volume level between television programs, commercials, and between the soft and loud passages of movies. Dynamic Volume looks at the preferred volume setting by the user and then monitors how the volume of program material is being perceived by listeners in real time to decide whether an adjustment is needed.

Whenever necessary, Dynamic Volume makes the

iii inecessary rapid or gradual adjustments to maintain the desired playback volume level while optimizing the dynamic range. Audyssey Dynamic Volume works fine by itself, but can also be used with

Audyssey Dynamic EQ. When both are on, Audyssey Dynamic EQ adjusts the perceived bass response, tonal balance, surround impression, and dialog clarity whether watching movies, flipping between television channels, or changing from stereo to

surround sound content, when Dynamic Volume adjusts the volume.

A/V Sync

m A/V Sync

_0 ms to 400 ms in 10 ms steps

When using progressive scanning on your Blu-ray Disc/DVD player, you may find that the picture and sound are out of sync. With this setting, you can correct this by delaying the audio signals.

To view the TV picture while setting the delay, press

ENTER.

To return to the previous screen, press RETURN.

The range of values you can adjust will depend on

whether your TV or display supports HDMI Lip Sync and

if the "LipSync" setting is set to "On" or not

(_ page 43).

•A/V Sync is disabled when the Direct listening mode is used with all analog input source.

Ell

Preset Name For Input Selector

mName

-- -, Blu-ray, DVD, HD DVD, VCR, DVR, Tivo,

CableSTB, SAT STB, PS3, Wii, Xbox, PC, TV, CD,

TAPE, iPod:

To reset to the default, select "- - -".

You can enter a preset name for each individual input selector for easy identification. When entered, the preset name will appear on the display.

•Can not set the input selector by the same name.

•This menu cannot be used for the AM, FIll or USB input selector.

Audio Selector

I Audio Selector

ARC:

The audio signal from your TV tuner can be sent to the NDMI OUT of the AV receiver/1

With this selection the TV's audio can be

automatically selected as a priority among other assignments.

HDMI:

This can be selected when NDMI IN has been

assigned as an input source. If both HDMI (HDMI IN) and digital audio inputs (COAXIAL IN or

OPTICAL IN) have been assigned, HDMI input is

automatically selected as a priority.

COAXIAL:

This can be selected when COAXIAL IN has been

assigned as an input source. If both coaxial and HDMI inputs have been assigned, coaxial input is

automatically selected as a priority.

OPTICAL:

This can be selected when OPTICAL IN has been

assigned as an input source. If both optical and HDMI inputs have been assigned, optical input is

automatically selected as a priority.

Analog:

The AV receiver always outputs analog signals.

You can set priorities of audio output when there are both digital and analog inputs.

•The setting is stored individually for each input selector.

•This setting can be made only for the input source that is assigned as HDMI IN, COA×IAL IN, or OPTICAL IN. If both HDM[ (HDMI IN) and digital audio inputs (COAXIAL IN or OPTICAL IN) are assigned, HDM[ input will be selected as a

priority by setting to "ARC" (_ page 42). To select the digital audio input, see "Digital Audio (Digital Audio Input)"

(_ page 35).

"1 You can select "ARC" if you select the TV/CD input selector. But you cannot select it if you've selected "OFF' in the "Audio Return Ch" setting (_ page 42).

4O