Onkyo HT-R590 Menu, Tone Control Settings, Speaker Levels, DB to 0 dB to +12 dB in 1 dB steps

Page 43

mLipSync Off On

This function allows the AV receiver to automatically correct any delay between the video and the audio, based

on the data from the connected monitor.

•This function works only if your HDMl-compatible TV supports HDM[ Lip Sync.

After changing the settings of the "HDMI Ctrl

(RIHD)", "HDMI Through" or "Audio Return Ch", turn off the power to all connected pieces of equipment and then turn them on again. Refer to the instructions for all connected pieces of equipment.

You can change various audio settings from the Home

menu (_ page 31).

1 Press RECEIVER followed by HOME.

2 Use &/, and ENTER to select "Audio", and then

use l/¥/_/_ to make the desired selection.

!

•These settings are not available ill either of the following cases:

-a pair of headphones is connected.

-the "Audio TV Out" setting is set to "On" (_ page 42) and all input selector other than HDM[ is selected.

-"HDMI Ctrl (RIHD)" is set to "On" (_ page 42) and you're listening through your TV speakers.

Tone Control Settings

IBass

-10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut low-frequency sounds output from the front speakers.

mTreble

-10 dB to 0 dB to +10 dB in 2 dB steps

You can boost or cut high-frequency sounds output from the front speakers.

You can adjust the bass and treble for the front speakers, except when the Direct listening mode is selected.

Speaker Levels

m Subwoofer Level*l

-15 dB to 0 dB to +12 dB in 1 dB steps

m Center Level

-12 dB to 0 dB to +12 dB in 1 dB steps

You can adjust the volume of each speaker while listening to an input source.

These temporary adjustments are cancelled when the AV receiver is set to Standby. To save the setting you made

here, go to "Level Cal (Level Calibration)" (_ page 37) before setting the AV receiver to Standby.

•You cannot use this function while the AV receiver is muted.

•Speakers that are set to "No" or "None" in the "Sp Config (Speaker Configuration)" (_ page 36) cannot be adjusted.

"1 This procedure can also be performed on the AV receiver by using its SUBWOOFER LEVEL.

Audyssey

mAudyssey

See "Audyssey" of "Source Setup" (_ page 39).

m Dynamic EQ

See "Dynamic EQ" of"Source Setup" (_ page 39).

m Dynamic Volume

See "Dynamic Volume" of "Source Setup" (_ page 39).

•These technologies can be used when all the following conditions are met:

-Room Correction and Speaker Setup is completed. Note that

"Audyssey" requires the "Audyssey 2EQ Full Calibration" method.

-Any listening mode other than Direct is selected.

-A pair of headphones is not connected.

-The input selector other than USB is selected.

•The setting is stored individually for each input selector.

Operating on the AV receiver

1Press TONE on the AV receiver repeatedly to

select either "Bass" or "Treble".

2Use + and - on the AV receiver to adjust.

•To bypass the bass and treble tone circuits, select the Direct listening mode.

Ell

43

Page 42 Page 44
Image 43
Page 42 Page 44
Contents Iiiiiiiii HT-R590Are provided For your safety Install IntoAdjust only Safety Purpose InstructionsFCC Information for User PrecautionsFor models having a power cord with a polarized plug Preventing Hearing Loss CautionRemote control sensor AV receiver 16 ft, 5 m Supplied AccessoriesInstalling the batteries Aiming the remote controllerContents Connections FeaturesAmplifier ProcessingFront & Rear Panels Tuning Mode button 21 Display buttonTUNING, Preset 21 to 22, arrow and Enter Master Volume control Music Optimizer button 32 Phones jackHEiMiMOpt PLxzEX Neo6 YAudysse y D nammEQVol Muting indicatorFor detailed information, see the pages in parentheses + TrueHD DhL-uD Mstr ES 96124 Exp@ Monitor OUT V jack AC Inlet Brazilian models Power cord North American and Asian modelsBrazilian models IN, Game IN, TV/CDControlling the tuner Remote Controller@ button Remote MODE/INPUT Selector buttons19 47 toScrew-type speaker terminals Connecting the AV ReceiverConnecting the Speaker Cables Banana Plugs excluding Asian modelsNumber Channels Speaker ConfigurationSpeaker Connection Precautions Using a Powered SubwooferDescription Signal Cable JackConnected image with AV components AV Cables and JacksVCR or DVD recorder/Digital Video Recorder Audio return channel ARC functionMonitor How to record the videoSee Recording to make a connection for video recording @ InputVCR, DVD recorder Cassette tape deck, CDR, MD recorder, etc System On/Auto Power OnRemote Control Direct ChangeAsian models Using thumbtacksBe careful that you dont injure yourself when Turning On/Off the AV Receiver Press Receiver followed by O on the remote controllerOperating on the AV receiver Operating with the remote controllerPlayback @ CH +@ Mode Standard Mode controlAuto tuning mode Extended Mode controlUsing the Tuner Tuning into Radio StationsPress Memory Using RDS Asian modelsMode @ Listening to Traffic News TP Displaying Radio Text RTFinding Stations by Type PTY EnterMeasurement procedure Using Basic Functions10Press Enter Listening Position @, and connect it to the Setup MIC jackWhen youve finished making the settings, press Turn on the AV receiver and the connected TVSpeaker matching error Error MessagesChanging the Speaker Setup Manually Iigio,ii@-- Error messageMUSIC----GAME MOVIE/TV--STEREO Studio-Mix*l Onkyo-Original DSP Listening ModesGame-Action*l Game-Rock*lHI.It Listening ModesSpeaker Layout 12.1113.1II5.1I Stereo Mono Multichannel Dolby Pro Logic IIz Height Dolby EXNilNNI-I2 NillNi11-l*2NillNilI-I NilNNNilPress Receiver followed by Home Listening ModeInput Info*lTV/CD --+ Dock t Tape You can adjust the brightness of the AV receivers DisplayFollowing information can typically be displayed Repeat this step to select the desired input displayPress Receiver followed by Muting AV RecordingRecording Separate AV Sources You can temporarily mute the output of the AV receiverExplanatory Notes Advanced SetupTV/CD BD/DVD, VCR/DVR, CBL/SAT, GAME, AUXVideo OUT Surround SubwooferFront Surround*l, Front12dB to 0 dB to +12 dB in 1 dB step Multiplex/Mono SettingsPLIIz Height Gain Dolby SettingsDTS Setting Theater-Dimensional SettingDynamic EQ Dynamic VolumeAudyssey Audyssey OffAudio Selector Preset Name For Input SelectorAbout Audyssey Dynamic Volume SyncTuner Setting the Incoming Digital Signal Fixed ModeOSD Setting Remote Control SettingsAudio Return Ch ARC Detects the signal and automatically selects the inputHdmi Through Audio TV OutDB to 0 dB to +12 dB in 1 dB steps Tone Control SettingsMenu Speaker LevelsOptimizer Late Night FunctionMusic Optimizer CinemaFILTERWithout the RI Control IPod/iPhone Playback via Onkyo DockRI Dock With the RI ControlRepeat Random DISPLAY*3 Muting Available buttonsREMOTEPress the appropriateMODE first TOP MENU*2 AITI41, Enter Playlist 4/=82990 Onkyo Dock without f/I While holding down Remote Mode to whichControlling Other Onkyo Components Onkyo MD recorder without 7132332910/33001/31612 Controlling a Blu-ray Disc/DVD Player, HDBlu-ray Disc/DVD player with r411-11O Display Muting @ Disc Menu @ Return @ Audio CLR Random ModeButtons Menu EnterTheres no sound Or itsvery Quiet TroubleshootingHome Cantturn on the AV receiverMThe front high or surround back speakers produce no sound Theresno picture from a source connected to an Hdmi Sound changes when I connect my headphonesR I functions dont work How do I change the language of a multiplex sourceVideo Attenuation Video Signal Flow Chart Blu-ray Disc/DVD player, etc Connection Tips and Video Signal PathFlac .flac or .FLAC USB FeaturesMP3 .mp3 or .MP3 MP4/.3GP or .3G2About Hdmi @ For r-UHO-compatible Using an RIHD-compatible TV, Player, or RecorderToshiba REGZA-LINK compatible TV Sharp TV @ Players/RecordersOperate with the remote controller How to connect and setupTV, projector, etc Tuner Section SpecificationsAmplifier Section General Video SectionOnkyo Sound & Vision Corporation
Related manuals
Manual 60 pages 13.22 Kb

HT-R590 specifications

The Onkyo HT-R590 is a versatile and feature-rich home theater receiver that has garnered attention for its impressive audio performance and user-friendly design. This device serves as the heart of a home entertainment system, delivering a dynamic audio experience that enhances movies, music, and gaming.

One of the standout features of the HT-R590 is its support for high-definition audio formats. The receiver is capable of decoding Dolby TrueHD and DTS-HD Master Audio, making it an excellent choice for those who appreciate high-quality sound in their media. With a powerful output of 100 watts per channel, it can drive even the most demanding speakers, ensuring that soundtracks and effects come to life with clarity and depth.

The HT-R590 also features a variety of connectivity options, including multiple HDMI inputs that support 4K video pass-through. This means that users can connect their Blu-ray players, gaming consoles, and streaming devices without hassle, making it easy to create a comprehensive home theater setup. The receiver also includes legacy connections for older devices, such as composite and component video inputs, providing flexibility for various audio and video sources.

Another notable characteristic of the Onkyo HT-R590 is its incorporation of Audyssey technology. This advanced room correction technology optimizes the sound output based on the specific acoustics of the room. By analyzing the space and adjusting the audio settings accordingly, users can achieve a balanced and immersive sound experience, regardless of room dimensions or speaker placements.

The user interface of the HT-R590 is designed with convenience in mind. A clear and intuitive remote control allows users to navigate settings, adjust audio levels, and switch inputs with ease. Furthermore, the on-screen display simplifies the setup process, guiding users through configuration steps to ensure optimal performance.

In addition to its robust audio capabilities, the Onkyo HT-R590 supports various streaming options through built-in Bluetooth technology. This allows users to easily connect their smartphones and tablets to stream music directly to the receiver, expanding the functionality beyond traditional home theater setups.

In summary, the Onkyo HT-R590 is an excellent choice for anyone looking to elevate their home audio experience. With its high-definition audio support, extensive connectivity options, advanced room correction technology, and user-friendly interface, this receiver stands out as a formidable option in the home theater market, delivering exceptional sound quality and versatility for a wide range of multimedia applications.
Top Page Image Contents