CD/MP3-CD Operations
Finding a passage within a track
1Press and hold down on S or T (à or á).
➜The disc is played at high speed and low volume.
2When you recognize the passage you want, release S or T (à or á).
➜Normal playback continues.
Note:
–During a disc programme or if REPEAT/ SHUFFLE mode active, searching is only possible within the same track.
Selecting a desired album/track (MP3 disc only)
To select a desired album
●Press 4 or 3 repeatedly.
To select a desired track
●Press S or T (¡ or ™) repeatedly.
Different play modes: SHUFFLE and REPEAT
You can select and change the various play modes before or during playback.
1Press MODE on the remote control to select :
➜shuffle – tracks of the entire disc/ programme are played in random order.
➜shuffle repeat all – to repeat the entire disc/ programme continuously in random order.
➜repeat all – to repeat the entire disc/ programme.
➜repeat – to repeat the current track.
2To return to normal playback, press MODE until the various SHUFFLE/ REPEAT modes are no longer displayed.
●You can also press 9 to cancel your play mode.
Note:
– If Shuffle is activated on a
Programming the disc tracks
Programming tracks is possible when playback is stopped. Up to 20 tracks can be stored in the memory in any order.
1Press PROGRAM to enter the programming mode.
➜ A track number is shown and prog flashes.
2Press S or T (¡ or ™) repeatedly to select your desired track number.
●For MP3 disc, press 4 / 3 and S / T
(¡ or ™) to select the desired album and track for programming.
3Press PROGRAM to confirm the track number to be stored.
➜The number of tracks programmed and total playing time of the programme is shown briefly, then the selected track and “PROG”.
➜For MP3 disc, total playing time will not be shown.
4Repeat steps
➜“MEMORY FULL” is displayed if you attempt to programme more than 20 tracks.
5To start playback of your disc programme, press
ÉÅ.
Note:
– It is not possible to create a programme with MP3 tracks from multiple CDs, or combined with normal audio tracks.
Reviewing the programme
In stop mode, press and hold PROGRAM until the display shows all your stored track numbers in sequence.
Erasing the programme
●Press Ç once when playback is stopped or twice during playback.
➜ prog disappears and “CLEAR” is displayed.
Note:
–The programme will be erased when the system is disconnected from the power supply or when the disc tray is opened.
E n g l i s h
13
pg | 13 | 4/16/02, 7:05 PM 3140 115 29261 |