E n g l i s h
Troubleshooting
RADIO RECEPTION
| Radio reception is poor. | – If the signal is too weak, adjust the antenna or |
|
| connect an external antenna for better |
|
| reception. |
|
| – Increase the distance between the Micro HiFi |
|
| System and your TV or VCR. |
|
|
|
TAPE OPERATION / RECORDING |
| |
|
|
|
| Recording or playback cannot be made. | – Clean deck parts, see “Maintenance”. |
|
| – Use only normal (IEC I) tape for recording. |
|
|
|
| “CHECK TAPE” is displayed. | – Apply a piece of adhesive tape over the missing |
|
| tab space. |
|
|
|
| The tape deck door cannot open. | – Remove and reconnect the AC power plug and |
|
| switch on the system again. |
|
|
|
GENERAL
The system does not react when buttons | – Remove and reconnect the AC power plug and | |
are pressed. |
| switch on the system again. |
|
|
|
Sound cannot be heard or is of poor | – | Adjust the volume. |
quality. | – | Disconnect the headphones. |
– Check that the speakers are connected correctly.
– Check if the stripped speaker wire is clamped.
– Make sure the
The left and right sound outputs are reversed.
– Check the speaker connections and location.
The remote control does not function properly.
–Select the source (CD or TUNER, for example) before pressing the function button (É,í,ë).
–Reduce the distance between the remote control and the system.
–Insert the batteries with their polarities (+/– signs) aligned as indicated.
–Replace the batteries.
–Point the remote control directly toward IR sensor on the front of the system.
The timer is not working.
–Set the clock correctly.
–Press TIMER to switch on the timer.
–If a recording is in progress, stop the recording.
The Clock/Timer setting is erased.
–Power has been interrupted or the power cord has been disconnected. Reset the clock/timer.
20
pg | 20 | 4/16/02, 7:06 PM 3140 115 29261 |