Clock/Timer
|
|
|
|
| N |
|
|
|
|
|
|
|
|
|
|
| |
|
|
| D | B | Y |
|
|
|
| A | N |
|
|
|
|
| |
T |
|
|
|
|
|
| ||
|
|
|
|
|
|
| ||
S |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
| iR |
|
|
|
|
| SOURCE | TIMER SET | CLOCK |
|
BAND |
| + | REC | |||||
|
|
|
|
|
| MP3•ALBUM | VOLUME |
|
DISPLAY |
| - |
| |||||
|
|
|
|
|
|
|
| |
|
|
|
|
| PROGRAM | PRESET | TRACK•SEARCH•TUNE |
|
Clock setting
1In standby mode, press and hold CLOCK.
➜The clock digits for the hours flash.
2Press VOLUME +/- to set the hours.
3Press CLOCK again.
➜The clock digits for the minutes flash.
4Press VOLUME +/- to set the minutes.
5Press CLOCK to confirm the time.
Timer setting
●The system can be used as an alarm clock, whereby the CD,TUNER or TAPE is switched on at a set time.The clock time needs to be set first before the timer can be used.
●You can also use it to record a favourite tuner programme at a set period (refer to “Recording timer”)
●During setting, if no button is pressed within 90 seconds, the system will exit timer setting mode automatically.
1In standby mode, press TIMER SET for more than two seconds.
2Press SOURCE repeatedly (or CD, TUNER, TAPE on the remote control) to select the sound source.
3Press TIMER SET to confirm your desired mode.
➜The selected source 
is shown. Display sequence scrolls “SET ON TIME” and 
flashes. The clock digits for the hours flash.
4Press VOLUME +/- to set the hours.
5Press TIMER SET again.
➜The clock digits for the minutes flash.
6Press VOLUME +/- to set the minutes.
7Press TIMER SET to confirm the time.
➜The timer is now set and activated.
Activating and deactivating timer
●In standby or during playback, press TIMER once on the remote control.
➜ Display shows 
if activated, and disappears if deactivated.
Sleep timer setting
The sleep timer enables the system to switch off by itself after a set period of time.The clock time needs to be set first before the sleep timer can be used.
1Press SLEEP on the remote control repeatedly to select a preset time.
➜The selections are as follows (time in minutes):
60 ™ 45 ™ 30 ™ 15 ™ 0FF ™ 60 …
➜"SLEEP XX" or "OFF" is displayed. "XX" is the time in minutes.
2When you reach the desired length of time, stop pressing the SLEEP button.
➜Once SLEEP is activated, "SLEEP ON" scrolls across the display at repeated intervals.
To deactivate the sleep timer
●Press SLEEP repeatedly until "0FF" is displayed, or press the STANDBY ON button.
E n g l i s h
|
| 17 |
pg | 17 | 4/16/02, 7:05 PM 3140 115 29261 |