Philips MC-M250 Optional connection, Inserting batteries into the remote control, FM Antenna

Page 9

Preparations

FM Antenna

Optional connection

s h

For better FM stereo reception, connect an outdoor FM antenna to the FM AERIAL (FM ANTENNA) terminal.

CSpeakers Connection

Front Speakers

Connect the speaker wires to the SPEAKERS terminals, right speaker to "RIGHT" and left

speaker to "LEFT", coloured (marked) wire to "+" and black (unmarked) wire to "-".

The optional equipment and connecting cords are not supplied. Refer to the operating instructions of the connected equipment for details.

Connecting other equipment to your system

Connect the audio left and right OUT terminals of a TV,VCR, Laser Disc player, DVD player or CD Recorder to the AUX IN terminals.

Note:

If you are connecting equipment with a monaural output (a single audio out terminal), connect it to the AUX IN left terminal. Alternatively, you can use a “single to double” cinch cable (the output sound still remain monaural).

E n g l i

1 2

Fully insert the stripped portion of the speaker wire into the terminal as shown.

Notes:

For optimal sound performance, use the supplied speakers.

Do not connect more than one speaker to any one pair of +/- speaker terminals.

Do not connect speakers with an impedance lower than the speakers supplied. Please refer to the SPECIFICATIONS section of this manual.

Inserting batteries into the remote control

Insert two batteries (type R03 or AAA) into the remote control with the correct polarity as indicated by the "+" and "-" symbols inside the battery compartment.

CAUTION!

Remove batteries if they are exhausted or will not be used for a long time.

Do not use old and new or different types of batteries in combination.

Batteries contain chemical substances, so they should be disposed off properly.

9

pg 001-020/M250/21-Eng

9

4/16/02, 7:04 PM 3140 115 29261

Image 9
Contents M250 México 3140 115 Pg 001-020/M250/21-Eng 16/02, 704 PM 3140 115 Index Contents Safety information Supplied accessories About MP3 discGeneral Information Environmental InformationPreparations PowerRear connections Antennas ConnectionConnecting other equipment to your system Inserting batteries into the remote controlOptional connection FM AntennaSource ¡ TimerBand / Display ProgramBasic Functions Discs for playback CD/MP3-CD OperationsPlaying a disc Text displaySelecting a desired album/track MP3 disc only Finding a passage within a trackDifferent play modes Shuffle and Repeat Programming the disc tracksTuning to preset radio stations Tuning to radio stationsRadio Reception Programming radio stationsTape Operation / Recording To reset the tape counter displayTape playback Rewinding / Fast forwardingWhen recording is in progress Recording timerPreparation for recording Synchro start CD recordingClock setting Clock/TimerTimer setting Sleep timer settingSpecifications Troubleshooting MaintenanceProblem Solution B CRadio Reception Tape Operation / RecordingGeneral